Druckmessgerät PG-208｜NIDEC COMPONENTS EUROPE GmbH

Druckmessgerät PG-208

PG-208

PG-208

Kontaktiere uns

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Pressure gauge PG-208

Excellent stability
A semiconductor chip is used as pressure a sensing element. State of the art circuit technology guarantees excellent temperature compensation.
Low power consumption
Approx. 9000 hours (one year) continuous operation by 3.6 V lithium battery is expected due to the adoption time sharing operation method.
Easy reading with a large LCD display
With pressure switches function
Two independent pressure setting points of HI and LO
With analog output (0 ~ 1 V)
Meets DIN sizes W72 × H72 × D40 mm
PG-208 is corrosion resistant due to the use of stainless steel diaphragm.

STANDARD SPECIFICATIONS[Pa version]

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C, excitation voltage of 12 V DC and battery of 3.6 V DC.

General specifications	Pressure reference		Gauge
	Model number (Pa unit display)		102GP	103GP	102VP
	Model number (Pa unit display)		102GP	103GMP	102VP
	Rated pressure range		100kPa	1000kPa	-100kPa
	Maximum pressure		200kPa	2000kPa	200kPa
	Break-dawn pressure		300kPa	3000kPa	300kPa
	Operating temp., range		0 ~ 50°C
	Compensated temp. range		0 ~ 50°C
	Operating humidity		35~85%RH（No condensation）
	Storage temp.		-20~70°C(Atmospheric pressure, humidity 65 %RH maximum）
	Pressure medium		Corrosive gases/liquids compatible with SUS316 and SUS316L ※ 1
	Gravitational effect (From vertical position to horizontal position)		Approx. 0.5% F.S.	Approx. 0.05% F.S.	Approx. 0.5% F.S.
	Pressure port		G 3/8(PF 3/8)
	Net weight		Approx. 390g
	Power	Battery type	Lithium battery 3.6 VDC (ER6VM) Battery life 9000 h minimum
	Power	External power	5〜 10 VDC、10 〜 24 VDC (Selectable by electrical terminals only in case of stand type) Consumption current : 20 mA maximum
Display	No. of digits		3 1/2
	Display element		LCD
	Rated display range (Pa unit display)		00.0~100.0kPa	000~1000kPa	00.0~− 100.0kPa
	Rated display range (Pa unit display)		00.0~100.0kPa	.000~1.000(MPa)	00.0~− 100.0kPa
	Display cycle		Approx. 3 times/s
	Display accuracy		± 0.5 %F.S. ± 2 counts (at 25 ± 5 °C) maximum
	Thermal error	ZERO	± 0.1 % F.S./°C ± 2 counts
	Thermal error	SPAN	± 0.05 % Reading/°C ± 2 counts
	Resolution		1 count
Switch	No. of setting points		2 points of HI and LO (one point of HI only for the external power supply version)
	Switching capacity		30 VDC、40 mA（NPN open collector））
	Residual voltage		1.2 VDC（When current inflow is 40 mA）
	Output conditions		Measured press ≧ LO set press. → LO output ON, Measured press. ≧ HI set press. → HI output ON.
	Setting method		When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LO set pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can bemade by VR watching the display.
	Pressure setting range (Pa unit display)		00.0~100.0kPa	000~1000kPa	00.0 ~-100.0kPa
	Pressure setting range (Pa unit display)		00.0~100.0kPa	.000~1.000(MPa)	00.0 ~-100.0kPa
	Switch state indication		Indicated by an LCD display (HI or LO) when the switch output is ON.
	Response		Approx. 100 ms
	Switching hysteresis		4 counts maximum
	Analog voltage output 　※ 2		Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 °C), Load: 1 kΩ minimum
	Additional function		Low battery indication (LO BAT)

※ 1 : Pressure medium will be limited to the ones compatible with Fluoro rubber when an O-ring supplied as an accessary is used and also compatible with the material of the joints.
※ 2 : Available only for external power type.

STANDARD SPECIFICATIONS[Non SI unit version]

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C, excitation voltage of 12 VDC and battery of 3.6 VDC.

General specifications	Pressure reference		Gauge
	Model number		102G	103G	102VH
	Rated pressure range kPa {kgf/cm2 }		98.1{1}	981{10}	-98.1{-735 mmHg}
	Maximum pressure kPa {kgf/cm2 }		196{2}	1961{20}	196{1471 mmHg}
	Break-dawn pressure kPa {kgf/cm2 }		294{3}	2941{30}	294{2206 mmHg}
	Operating temp., range		0 ~ 50°C
	Compensated temp. range		0 ~ 50°C
	Operating humidity		35 ~ 85%RH（No condensation）
	Storage temp.		-20~70°C（Atmospheric pressure, humidity 65 %RH maximum）
	Pressure medium		Corrosive gases/liquids compatible with SUS316 and SUS316L ※ 1
	Gravitational effect (From vertical position to horizontal position)		Approx. 0.5% F.S.	Approx. 0.05% F.S.	Approx. 0.5% F.S.
	Pressure port		G 3/8(PF 3/8)
	Net weight		Approx. 390g
	Power	Battery type	Lithium battery DC 3.6 V (ER6VM) Battery life 9000 h minimum
	Power	External power	5~10 VDC、10~24 VDC (Selectable by electrical terminals only in case of stand type) Consumption current : 20 mA maximum
Display	No. of digits		3 1/2
	Display element		LCD
	Rated display range(Pa unit display)		.000~1.000 kgf/cm2	0.00~10.00 kgf/cm2	000~-735 ※ 2 mmHg
	Display cycle		Approx. 3 times/s
	Display accuracy		± 0.5 %F.S. ± 2 counts (at 25 ± 5 °C) maximum
	Thermal error	ZERO	± 0.1 % F.S./°C ± 2 counts maximum
	Thermal error	SPAN	± 0.05 % Reading/°C ± 2 counts
	Resolution		1 count
Switch	No. of setting points		2 points of HI and LO (one point of HI only for the external power supply version)
	Switching capacity		30 V DC、40 mA（NPN open collector）
	Residual voltage		1.2 V DC（When current inflow is 40 mA）
	Output conditions		Measured press ≧ LO set press. → LO output ON, Measured press. ≧ HI set press. → HI output ON.
	Setting method		When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LO set pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can be made by VR watching the display.
	Pressure setting range (Pa unit display)		.000 ~ 1.000kPa	0.00 ~ 10.00kPa	000 ~ − 735 ※ 2
	Switch state indication		Indicated by an LCD display (HI or LO) when the switch output is ON.
	Response		Approx. 100 ms
	Switching hysteresis		4 counts maximum
	Analog voltage output ※ 3		Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 °C), Load: 1 kΩ minimum
	Additional function		Low battery indication (LO BAT)

※ 1：Pressure medium will be limited to the ones compatible with Fluoro rubber when an O-ring supplied as an accessary is used and also compatible with the material of the joints.
※ 2：Measurement can be made up to “- 760 mmHg” for 102VH and up to “760 mmHg” for 102AH (Accuracy not guaranteed beyond the rated pressure.).
※ 3：Available only for external power type.

MODEL NUMBER DESIGNATION

PG-208-	102	G P-	3 -	P
Series name	Rated pressure range 101:0~9.81 kPa {0~0.1 kgf/cm2} 0~10 kPa (Pa unit display） 102:0~98.1 kPa {0~1 kgf/cm2} 0~100 kPa (Pa unit display） 103:0~981 kPa {0~10 kgf/cm2} 0~1 MPa (Pa unit display）	Pressure reference G:Gauge VH:Gauge(Vacuum) AH:Absolute GP:Gauge Pa unit display GMP:Gauge(103 type only） Pa unit display VP:Gauge(Vacuum） Pa unit display AP:Absolute Pa unit display	Power Blank:Battery 3:External power (Analog output is available)	Installation S:Stand type

PG-208-

102

G P-

3 -

Series name

Rated pressure range

101:0~9.81 kPa

{0~0.1 kgf/cm2}

0~10 kPa

(Pa unit display）
102:0~98.1 kPa

{0~1 kgf/cm2}

0~100 kPa

(Pa unit display）
103:0~981 kPa

{0~10 kgf/cm2}

0~1 MPa

(Pa unit display）

Pressure reference

G:Gauge
VH:Gauge(Vacuum)
AH:Absolute
GP:Gauge
Pa unit display

GMP:Gauge(103 type only）
Pa unit display
VP:Gauge(Vacuum）
Pa unit display
AP:Absolute
Pa unit display

Power

Blank:Battery
3:External power
(Analog output is available)

Installation

S:Stand type

LIST OF MODEL NUMBERS

◆Pa version

Model number	Pressure medium	Rated pressure kPa {kgf/cm2}	Unit of display	Installation	Power	CAD
PG-208-102GP-S	For corrosive gases or liquids	0~100	kPa	Stand type	Battery	3D CAD（Any Model）
PG-208-102GP-3-S	For corrosive gases or liquids	0~100	kPa	Stand type	External power	3D CAD（Any Model）
PG-208-103GP-3-S	For corrosive gases or liquids	0~1000	kPa	Stand type	External power	3D CAD（Any Model）
PG-208-103GP-S	For corrosive gases or liquids	0~1000	kPa	Stand type	Battery	3D CAD（Any Model）
PG-208-102VP-S	For corrosive gases or liquids	0~− 100	kPa	Stand type	Battery	3D CAD（Any Model）
PG-208-102VP-3-S	For corrosive gases or liquids	0~− 100	kPa	Stand type	External power	3D CAD（Any Model）
PG-208-103GMP-S	For corrosive gases or liquids	0~1000	MPa	Stand type	Battery	3D CAD（Any Model）
PG-208-103GMP-3-S	For corrosive gases or liquids	0~1000	MPa	Stand type	External power	3D CAD（Any Model）

◆Non SI unit version

Model number	Pressure medium	Rated pressure kPa {kgf/cm2}	Unit of display	Installation	Power	CAD
➡PG-208-102G-S	For corrosive gases or liquids	0~98.1{0~1}	kgf/cm2	Stand type	Battery	3D CAD（Any Model）
➡PG-208-102G-3-S	For corrosive gases or liquids	0~98.1{0~1}	kgf/cm2	Stand type	External power	3D CAD（Any Model）
➡PG-208-103G-S	For corrosive gases or liquids	0~981{0~10}	kgf/cm2	Stand type	Battery	3D CAD（Any Model）
➡PG-208-103G-3-S	For corrosive gases or liquids	0~981{0~10}	kgf/cm2	Stand type	External power	3D CAD（Any Model）
➡PG-208-102VH-3-S	For corrosive gases or liquids	0~− 98.1 {0~- 735 mmHg}	mmHg	Stand type	External power	3D CAD（Any Model）
➡PG-208-102VH-S	For corrosive gases or liquids	0~− 98.1 {0~- 735 mmHg}	mmHg	Stand type	Battery	3D CAD（Any Model）

※The products marked ➡ are manufactured upon receipt of order basis.

〈Option〉---DC3.6 V lithium battery Order item: Lithium battery
(The battery is an expendable item.The first one is provided with the unit.)

ENVIRONMENTAL CHARACTERISTICS

Test item	Test conditions	Permissible change
Vibration	Amplitude 1.5 mm P-P, 10 ~ 55 Hz, 3 directions for 2 hours each (packed)	Pressure indication, switch setting and analog output (zero and span) variation: ± 1 %F.S. maximum each. (Note: No analog output for the battery type.)
Shock	98.1 m/s2 , 3 directions for 3 times each (packed)
Moisture resistance	40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling	0 ~ Rated pressure, 106 cycles