Pressure transducer P-8300
- ●To buy this product, please go to the following Online Web stores.
Double diaphragm structure P-8300
- Double diaphragm structure
- Two pressure references to choose from Gauge and Absolute
- Built-in temperature compensation function (0 ~ 50 °C)
Model Number Designation
| P-8300 - | 102 | A- | 05 |
|---|---|---|---|
|
Series name |
Rated pressure range 351：0 ~ 34.3 kPa {0 ~ 0.35 kgf/cm2} |
Pressure reference |
Thermal error |
List of model numbers
| Model Number | Rated pressure kPa{kgf/cm2} | Maximum pressure kPa{kgf/cm2} | Break-down pressure kPa{kgf/cm2} | Pressure reference | CAD |
|---|---|---|---|---|---|
| P-8300-501G-05 | 49.0 {0.5} | 98.1 {1} | 147 {1.5} | Gauge | |
| P-8300-501G-10 | 49.0 {0.5} | 98.1 {1} | 147 {1.5} | Gauge | |
| P-8300-102G-05 | 98.1 {1} | 196 {2} | 294 {3} | Gauge | |
| P-8300-102G-10 | 98.1 {1} | 196 {2} | 294 {3} | Gauge | |
| P-8300-352G-05 | 343 {3.5} | 686 {7} | 1030 {10.5} | Gauge | |
| P-8300-352G-10 | 343 {3.5} | 686 {7} | 1030 {10.5} | Gauge | |
| P-8300-103G-05 | 981 {10} | 1961 {20} | 2942 {30} | Gauge | |
| P-8300-103G-10 | 981 {10} | 1961 {20} | 2942 {30} | Gauge | |
| P-8300-351A-05 | 34.3 {0.35} (abs) | 103 {1.05} (abs) | 147 {1.5} (abs) | Absolute | |
| P-8300-351A-10 | 34.3 {0.35} (abs) | 103 {1.05} (abs) | 147 {1.5} (abs) | Absolute | |
| P-8300-102A-05 | 98.1 {1} (abs) | 196 {2} (abs) | 294 {3} (abs) | Absolute | |
| P-8300-102A-10 | 98.1 {1} (abs) | 196 {2} (abs) | 294 {3} (abs) | Absolute |
Standard specifications
| Operating temp. range | -20 ~ 70°C |
|---|---|
| Compensated temp. range | 0 ~ 50°C |
| Operating humidity | 35 ~ 85%RH（No condensation） |
| Storage temp. | − 20 ~ 70°C（Atmospheric pressure, humidity 65 %RH maximum） |
| Bridge resistance | 4700 ± 30 %Ω |
| Pressure medium | Corrosive gases/liquids compatible with SUS316L |
| Insulation resistance | 100 MΩ minimum (500 V DC) |
| Dielectric strength | 500 V AC, 60 s（Leakage current 1 mA maximum） |
| Sealed liquid | Silicone oil |
| Net weight | Approx. 20g |
| Excitation current | 1.5mA DC(Constant current） |
Analog output
| Item | 501G | 102G | 352G | 103G | 351A | 102A | |
|---|---|---|---|---|---|---|---|
| Offset voltage | ± 5mV | ||||||
| Span voltage | 100 ± 50mV | ||||||
| Linearity/Hysteresis | ± 0.3%F.S. | ± 0.5%F.S. | |||||
| Thermal error (Reference temp.: 25 °C) | ZERO | ± 0.05/0.10%F.S./°C | |||||
| SPAN | ± 0.05/0.10%F.S./°C | ||||||
| Response | Approx. 2ms | ||||||
| Gravitational effect (From vertical position to horizontal position) |
Approx. 0.5%F.S. max. | Approx. 0.3%F.S. max. | Approx. 0.1%F.S. max. | Approx. 0.05%F.S. max. | Approx. 0.5%F.S. max. | Approx. 0.3%F.S. max. | |
Environment Characteristics
| Test item | Test conditions (At 25 ± 5 °C) | Permissible change |
|---|---|---|
| Vibration | 10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s2 , 3 directions for 2 hours each |
Offset voltage/Span voltage: ± 1 %F.S. maximum each |
| Shock | 981 m/s2 , 3 directions for 3 times each | |
| Pressure cycling | 0 ~ Rated pressure, 106 cycles | |
| Moisture resistance | 40 °C, 90 ~ 95 %RH, 240 hrs |
Outline dimensions
Unless otherwise specified, tolerance : ± 0.5 (Unit: mm)
-
Extra care should be taken with the diaphragm part. Do not touch the diaphragm directly to avoid damaging the diaphragm
Installation example
|
|
- An “O” ring P20 (conforms to JIS B 2401 Material:Fluoro-rubber) is provided as accessory. Make the mounting bore diametersφ 24 andφ 20 ± 0.1, and the surface-roughness as 6.3 S ( ▽▽▽ ).
Internal electrical schematics
|
|
Documents
- ●The above contents and descriptions are subject to change without notice.
