Slide switch ASE
-
●To buy this product, please go to the following Online Web stores.
Hyper-miniature Slide Switches
-
High Contact Reliability
Twin-contact clip mechanism for high contact reliability -
Immersion washable type
-
Gold-plated contacts suitable for low current applications
For PC board mounting -
Improved operability
The independent detent structure provides a lightoperating touch -
UL-recognized File No.LR38341
Part Number Designation
| A | SE | ２ | D- | ２ | M- | 10－ | Z |
|---|---|---|---|---|---|---|---|
|
Series code |
Type SE:Slide type |
Numberof poles 1:1 pole |
Switching function D:ON-ON/Terminal line for double poles are 2.54mm（0.1"） E:ON-OFF-ON/Terminal line for double poles are 2.54mm（0.1"） |
Terminal styles 1:PC terminal 6:Right angle（0.3inch pitch） |
Actuator shape Ⅿ:Standard |
Clip mechanism |
|
■Actuator Shape
■Right Angle Terminals
List of Part Numbers
| Part number | Circuit | Terminal | Switching function | Remarks | CAD |
|---|---|---|---|---|---|
| ASE1D-2M-10-Z | SPDT | PC terminal | ON-ON | Distance between two terminal rows : 2.54 mm | |
| ☆ASE1E-2M-10-Z | SPDT | PC terminal | ON-OFF-ON | Distance between two terminal rows : 2.54 mm | |
| ASE2D-2M-10-Z | DPDT | PC terminal | ON-ON | Distance between two terminal rows : 2.54 mm | |
| ★ASE2E-2M-10-Z | DPDT | PC terminal | ON-OFF-ON | Distance between two terminal rows : 2.54 mm | |
| ☆ASE2N-2M-10-Z | DPDT | PC terminal | ON-ON | Distance between two terminal rows : 5.08 mm | |
| ASE1D-5M-10-Z | SPDT | Right angle（0.2inch pitch） | ON-ON | Mounting height : 3.1 mm | |
| ASE2D-5M-10-Z | DPDT | Right angle（0.2inch pitch） | ON-ON | Mounting height : 3.1 mm | |
| ASE1D-6M-10-Z | SPDT | Right angle(0.3inch pitch） | ON-ON | Mounting height : 3.1 mm | |
| ☆ASE2D-6M-10-Z | DPDT | Right angle(0.3inch pitch） | ON-ON | Mounting height : 3.1 mm | |
| ★ASE2N-6M-10-Z | DPDT | Right angle(0.3inch pitch） | ON-ON | Mounting height : 5.15 mm |
Common Specifications
| Rating 0.4VA AC/DC | Voltagr range:20mV～60V Current range:1μA～50mA |
|---|---|
| Rating UL | AC/DC48V 50mA |
| Rating Max. | AC/DC60V 50mA |
| Rating Min. | AC/DC20mV 1μA |
| Initial contact resistance | 50mΩ max.(1.5mA 200μVAC） |
| Dielectric strength | 250VAC 1 minute |
| Initial insulation resistance | 500MΩ min. (500VDC） |
| Electrical life | 10,000 cycles at max. rating. 50,000 cycles at min. rating or 0.4VA |
| Operating force | 0.69～4.9N |
| Operating temperature range | －20℃～＋85℃ |
| Storage temperature range | －40℃～＋85℃ |
Outline Dimensions
Handling Precautions
Soldering Specifications
Manual Soldering/ Device ： Soldering iron 380℃, Max.; 3 seconds, Max.
Auto Soldering： Device ： Jet wave type or dip type 275℃, Max.; 6 seconds, Max.
Pre-heating should be done at temperatures ranging from 80℃ to 120℃ and within 120 sec.
Flux Cleaning
Solvent : Fluorine or Alcohol type.
Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for five minutes or longer at room temperature.
Do not use ultrasonic cleaning system
Mounting of Switch
Use the PC boards of φ1 holes.
Do not bend the terminals before mounting the switch on the PC board.
After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob, etc. of the switch.
Do not apply load exceeding 12.7 N (1.3 kgf) to the knob. Use a bracket (optional accessory) if the load is expected to exceed 12.7 N (1.3 kgf). The strength of the knob will be reinforced to 29.4 N (3 kgf) max..
PC Hole Layouts
Shorting (Make-Before-Break)
A switch which momentarily connects both circuits when the actuator is moved from Point A to B in the below fi gure.
All switches which are not marked as “Shorting” are “Non-shorting” (Break-Before-Make).
Packaging specifications
(Unit:mm)
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
