Toggle switch 8GA
-
●To buy this product, please go to the following Online Web stores.
Washable Standard Toggle
-
The 8G Washable Toggle Switch is designed for PC boards and are easily mountable on the board. A PC support terminal is provided for stable mounting. The processsealed structure allows cleaning after soldering.
-
Suitable for applications where panel space is limited and a larger toggle is needed.
-
Terminal style : PC Straight, Right angle and vertical mount PC terminals
-
Epoxy resin case : UL94V-0 self-extinguishing epoxy.
-
Insulation between terminal and ground : 4 mm minimum. Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent the entry of solder and flux.
-
Insulation barrier : Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.
-
UL Recognized product File No.E43275 CSA Certified product File No.LR38341
Part Number Designation
| 8 | GA | 1 | 01 | 2 | - Z | |
|---|---|---|---|---|---|---|
|
Series |
Actuator shape GA: Washable |
No. of poles 1: 1 pole |
Switching function 01: ON-ON |
Terminals 2: PC straight 4: PC R/A 6: PC V/M |
Contact material / Plating Blank: Bs+Ag or Cu+Ag / Silver plated / Silver plated Bs=Brass, Ag=Silver, |
◆Terminals
List of Part Numbers
| Part No. | Circuit | Terminals | Switching function | CAD |
|---|---|---|---|---|
| Part No.：8GA1012-Z | SPDP | PC straight | ON－ON | |
| Part No.：8GA2012-Z★ | DPDT | PC straight | ON－ON | |
| Part No.：8GA1014-Z | SPDP | PC R/A | ON－ON | |
| Part No.：8GA1016-Z☆ | SPDP | PC V/M | ON－ON |
★: Made to order products
Optional Accessories
| Accessory | Part No. | Color | Outline dimensions |
|---|---|---|---|
| Color Cap | 140000470030 | White |  |
| 140000470098 | Red | ||
| 140000470031 | Black | ||
| 140000470037 | Gray | ||
| 140000470038 | White |  |
|
| 140000470100 | Red | ||
| 140000470077 | Gray |
Common Specifications
| Rating Max. | Silver Contact:AC125V 6A AC250V 3A DC30V 4A Gold Contact:AC125V 6A AC250V 3A DC20V 25mA |
|---|---|
| Initial contact resistance | Silver Contact:10mΩ Max. （DC2～4V 1A） Gold Contact:20mΩ Max. （AC200μV 1.5mA） |
| Initial dielectric strength | AC1500V 1minute |
| Initial insulation resistance | 1000MΩMin. （ DC500V） |
| Electrical life | Alternate type:50,000cycles Momentary type:25,000cycles |
| Operating temperature range | －30～＋85℃ |
| Storage temperature range | －40～＋85℃ |
Precautions
Soldering Specifications
- Manual soldering/Device：Solder iron ①350℃ Max. 3 sec. Max.②310℃ Max. 7 sec. Max.
- Auto soldering/Device：Jet wave or dip type ①270℃ Max. 5 sec. Max. ②250℃ Max. 7 sec. Max.
- Pre-heating should be done at temperatures below 100℃ and within 30 seconds.
Flux Cleaning
- Solvent : Fluorine or Alcohol type.
- Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for fi ve minutes or longer at room temperature.
- Do not use the ultrasonic cleaning.
Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
- Mount the accessories after soldering and fl ux cleaning.
PC Hole Layouts
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
