Inclinometers ESC3000Z
-
●To buy this product, please contact Sales Reps, Distributors.
Drip-proof, High Accuracy , User-friendly Functons Tilt Angle Sensors
- ESC-Series industrial inclinometers are high performance sensors used MEMS accelerometer to determine inclination in X and Y axes with excellent precision.
- Using Aluminum Die-Cast housing, the versions offer mechanical stability andencapsulated sensor, and in addition a high environmental protection in harsh industrialenvironments.
- Dual Axis Measurement : up to ±80°
- High accuracy : Absolute Linearity < ±0.5%FS
- Various Data Output : Voltage, Current, Serial RS-485
*Requesting other serial interface such as SAE J1939 & CANopen, please contact us. - Stable measurement under vibration
- Programmable Parameters : Inclination range, Baud Rate, Data Transmissions Period, Filter factor
Standard Specifications
| Output type | Voltage Ratio | Voltage | Current | Serial（RS-485) |
|---|---|---|---|---|
| Electrical Angle | ±10°, ±20°, ±30°, ±45°, ±60°, ±80° Separate choice of X and Y axes (Option) Angle resetting function by RS-485 command is available (Option) |
±80° | ||
| Absolute Linearity | ± 0.5 %FS | ±0.1° (~ ±10°) ±0.2° (~ ±30°) ±0.5° (~ ±80°) |
||
| Input Voltage | 5±0.25 VDC | 8 ∼ 30 VDC | 24±4 VDC | ー |
| Current Consumption | 75 mA max. | |||
| Output Range | 10 ~ 90 %Vin | 0.5 ~ 4.5 V | 4 ∼ 20mA | ー |
| Output Resolution | 12bit equivalent | ー | ||
| Damper control | Time constant against input step : 443ms (Standard) Selectable 16 steps during 70ms∼900ms (Option) Damper resetting function by RS-485 command is available (Option) |
|||
| Temp.Characteristics | 0 ° position：± 0.5° (- 30 ~ 85 ℃ deviaton from 25 ℃) | |||
| Net Weight | Approx. 300 g | |||
| Cable | 6 cores Cabtyre Cable, Outer diameter: dia. 7.4 mm, Core: 0.5 mm2 | |||
| EMS | ISO11452 corresponding 1 % output shifting at 10 MHz∼1 GHz 100 V/m (Ratio, Current, Serial) , 50 V/m (Voltage) |
|||
| EMI | CISPR25 3rd.edit CLASS1 | |||
| Operational Temp.Range | -30 ~ 85 ℃ | |||
| ESD | ± 12 kV | |||
| Vibration | 70 m/s2 , 5 ~ 200 Hz / 10 min. 2 hours | |||
| Shock | 1000 m/s2 , Half sine wave 6 ms | |||
| IP Grade | IP67 | |||
| Index Point Teach-in | Index point ( ± 5° max. / horizonality) Teach-in setting. (Option) | |||
◆Temperature Characteristics
Part Number Designation
| ESC30- | 10 | Z- | R- | DB | 0 | L | 0 | 0 |
|---|---|---|---|---|---|---|---|---|
|
Series Number |
X axis 10 : ±10° 20 : ±20° 30 : ±30° 45 : ±45° 60 : ±60° 80 : ±80° |
Output axis Z : X&Y X : X axis only Y : Y axis only |
Output type R : Ratio 10 ~ 90 %Vin V : Voltage 0.5 ~ 4.5 V A : Current 4 ~ 20 mA D : RS 485 only |
Dampar control ※See table below |
Output Characteristics 0 : X&Y Output increasing 1 : X Output decreasing Y Output increasing 2 : X Output increasing Y Output decreasing 3 : X Output decreasing Y Output decreasing |
Baud rate L : 9600bps |
Terminating resistance 0 : Not avail. |
USAC 0 : Not avail. |
- Cut-off Frequency and Time constant against Damper time constant are shown the below table. It is possible to choose the best Damper time constant by operating speed and vibration condition.
| Part Number | Level | Cut-off Frequency | Time constant |
|---|---|---|---|
| D0 | 0 | 11.2 Hz |
120 ms |
| D1 | 1 | 9.27 Hz | 150 ms |
| D2 | 2 | 7.65 Hz | 160 ms |
| D3 | 3 | 6.32 Hz | 170 ms |
| D4 | 4 | 5.21 Hz | 190 ms |
| D5 | 5 | 4.30 Hz | 220 ms |
| D6 | 6 | 3.55 Hz | 250 ms |
| D7 | 7 | 2.93 Hz | 290 ms |
| D8 | 8 | 2.42 Hz | 330 ms |
| D9 | 9 | 2.00 Hz | 360 ms |
| DA | 10 | 1.65 Hz | 420 ms |
| DB | 11 | 1.36 Hz | 500 ms (Standard) |
| DC | 12 | 1.21 Hz | 590 ms |
| DD | 13 | 0.92 Hz | 700 ms |
| DE | 14 | 0.76 Hz | 810 ms |
| DF | 15 | 0.62 Hz | 970 ms |
New User New User-Friendly Functions
Easy Resetting Function for Index Point(0°)
- Only 5 seconds to reset index point (0°) using User-Settable Adjustment Card. (USAC)
(1) Please touch ESC 3 times with USAC.
(2) Then current position (±5°max./horizontality) will be changed to index point. - Any electrical connections do not needed.
- *Note: USAC is optional item
Programmable Digital Damping Control Function
- ESC3000Z serues implements the digital filter that would remove external noise to give the user a choice of certain filter factor from 16 available settings.
- Existing inclinometers have to be add extra electrical lowpass filter or mechanical damping structure.
- ESC30xxZ apply digital filter. It makes wider choice of cutoff frequency and easy to design frequency response.
- *Note: Frequency response is set before shipping. Programmable function will be option.
Serial communication Function
This series has RS485 interface as standard function.
Using RS-485 serial interface command, the following functions will be able to be used.
1. Retrieving of electrical angle position.
2. Retrieving of Serial number.
3. Teach-in setting of index (0°) point. (Option)
4. Changing of elecreial analog angle range. (Option)
5. Changing damper seting. (Option)
6. Changing baud rate. (Option)
7. Changing output cycle of serial data. (Option)
Output Characteristics
Schematic
Outline Dimensions
(Unit:mm)
Tilt angle direction
Handling Instruction
- Hall-IC sensor is impossible to measure resistance value as a variable resistor.
- Use this sensor in the place where is protected from ESD.
- Under acceleration 12m/s2 or Vibration Min.3000Hz, angle may not measured accurately.
- In certain temperature environment, output at 0° may be shifed by aging effect.
Documents
- ●The above contents and descriptions are subject to change without notice.
