Potentiometers CP-2FL
-
●To buy this product, please contact Sales Reps, Distributors.
Compact and highly accurate achieving both cost and accuracy
FeaturesFeatures
- Low Price and Short Delivery Time
- Effective Electrical Travel : 340°
- Independent Linearity : ±1%, ±0.5 %(Option)
- Ratiometric Voltage Output
- Shaft with Screw-driver slot for Adjustments
- Shaft diameter:
CP-2FL φ3.175mm, CP-2FL-6 φ6mm - Metal Sleeve Bearing : Copper Alloy
Electronics Characteristics
| Effective electrical angle | 340°+ 2, -3 |
|---|---|
| Total Resistance | 1 kΩ, 5 kΩ, 10 kΩ |
| Total Resistance Tolerance | ±20% |
| Independent Linearity | ±1% ( ±0.5% Optional) |
| Rated Dissipation | 0.5 W / 50°C |
| Output Smoothness | Max. 0.1% |
| Insulation Resistance | Min.100 MΩ /1000 VDC |
| Dielectric Strength | 1000 VAC /1 Minute |
| Temperature Coefficient of Resistance | ± 400 ppm/K |
Mechanical Characteristics
| Total Mechanical Travel | 360° Endless |
|---|---|
| Torque | Max. 2 mN·m |
| Thrust load tolerance | 2 N |
| Radial Load Tolerance | 5 N |
| Net weight | Approx. 20 g |
Environmental Characteristics
| Life Cycles | Min.10 Million Cycle |
|---|---|
| Operationg temp.range | -40 ∼ + 100 ℃ |
| Storage temp.range | -40 ∼ + 100 ℃ |
| Vibration | 150 m/s² , 2000 Hz 3 axis 2 hours each |
| Shock | 500 m/s² ,11 ms 6 directions 3 times |
Output Characteristics
Schematic
・①,②,③：Terminal No.
Mounting
(Unit:mm)
Outline Dimensions
(Unit: mm)
◆CP-2FL
◆CP-2FL-6
<Accessories>
Handling Instruction
- Miswiring mau cause burnout of resistive element.
- To avoid burnout of resistive element, do not supply 1mA or more current to terminal 2.
- To reduce sliding noises, load resistance must be as high as possible.
- Slight continuous vibration such as dither might cause short lifetime of the sensor.
- Please read carefully the instructions and directions for use.
Documents
- ●The above contents and descriptions are subject to change without notice.
