Rotary selector switch MRB
- ●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler unten.
Verkaufskanal Überprüfen Sie die Verteiler.- VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Super-Miniature Rotary Switches
- High contact reliability assured (Twin contact type)
- Selection of various circuits is flexible.
- Fully-sealed structure protects the contacts from environmental contamination.
- Immersion cleaning is possible.
- Best suited for use in dry circuit since the contacts and terminals are gold-plated.
Specifications
200mΩ | 0.4VA max.(12VDC max.) |
---|---|
Initial contact resistance | 200mΩ max. (1,5mA 200μVAC) |
Dielectric strength | 250VAC 1 minute |
Insulation resistance | 100MΩ min. (100VDC) |
Electrical life | 10,000 cycles |
Operating force | 1.96~5.88N・cm |
Operating temperature range | -20~+70℃ |
Storage temperature range | -40~+85℃ |
List of part numbers
Part Number | Circuit | Switching function | Remarks |
---|---|---|---|
★MRB1-3-Z | 1-pole 3-position | ON-ON-ON | The shaft fully rotates 360 degrees. |
◆Switching function
Outline Dimensions
(Unit:mm)
PC Hole Layouts
Optional Accessories
Handling Precautions
- Soldering Specifi cations
⑴Manual Soldering Device : Soldering iron 360℃, Max.; 3 seconds, Max.
⑵Auto Soldering Device: Jet wave type or dip type 275℃, Max.; 6 seconds, Max.
・Pre-heating should be done at temperatures from 80 to 120℃ and within 120 seconds
⑶When soldering two or more terminals to the common land, use the solder resist to solder them independently - Flux Cleaning
⑴For the solvent, use the fl uorine-based or alcohol-based solvent. Solvent: Fluorine or Alcohol type
⑵Do not use the ultrasonic cleaning system. - Mounting of Switch
⑴ Use the PC boards of φ1 holes.
⑵Do not bend the terminals before mounting the switch on the PC board.
⑶After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob, etc. of the switch.
⑷Do not apply a load exceeding 29.4 N (3 kgf) to the knob.
Unterlagen
Environmental Data
- ●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.