Rotary coded switch S-8000｜NIDEC COMPONENTS EUROPE GmbH

Rotary coded switch S-8000

S-8000

S-8000

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

3 bits 8 positions type

RoHS compliant
3 bits 8 positions type
Protection against dust and washable after soldering
DIP-pin configuration: 2.54 mm pitch

Standard specifications

Circuit type	BCO (Real code, complementary code)
Operating temperature range	− 25 ~ 70 °C
Storage temperature range	− 25 ~ 70 °C
Sealing	Washable by “O” ring
Net weight	Approx. 0.27 g (S-8010, S-8030) Approx. 0.34 g (S-8110, S-8130) Approx. 0.33 g (S-8011, S-8031) Approx. 0.40 g (S-8111, S-8131)

Electrical Characteristics

Contact rating	Non-switching DC50 V 100 mA Switching DC5 V 100 mA MinimumDC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	1000 MΩ (DC100 V) minimum
Dielectric strength	AC250 V, 60 s

Mechanical Characteristics

No. of positions	8
Adjustment torque	36 mN·m {367 gf·cm} maximum
Stepping angle	45°
Terminal strength	10 N {1.02 kgf} minimum
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum Manual soldering： 380 ± 10 °C, 3 ~ 4 s

Environmental Characteristics

Vibration	Amplitude 1.5 mm or　Acceleration 98 m/s ,10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms　6 directions for 3 times each
Load life	10000 steps minimum　DC5 V, 100 mA
Humidity (Steady state)	40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure	70 °C, 96 h
Low temperature exposure	− 25 °C, 96 h
Thermal shock	− 25 (0.5 h) ~ 70 °C (0.5 h), 5 cycles

Part number designation

S-8	0	1	0	W
Series name	Shape of rotor 0：Without knob 1：With knob (extended shaft)	Code format 1：Real code 3：Complementary code	Setting position 0:Top setting 1: Side setting	Form of packaging W：Tray packaging Blank：Plastic bag

S-8

Series name

Shape of rotor

0：Without knob

1：With knob (extended shaft)

Code format

1：Real code

3：Complementary code

Setting position

0:Top setting

1: Side setting

Form of packaging

W：Tray packaging

Blank：Plastic bag

List of part numbers

Part number	Code format	Setting position	Shape of rotor	Pieces in package	CAD
S-8010W	Binary coded octal Real code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-8010	Binary coded octal Real code	Top setting	Without knob	100 pcs./pack	3D CAD（Any Model）
S-8110W	Binary coded octal Real code	Top setting	With knob (extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-8110	Binary coded octal Real code	Top setting	With knob (extended shaft)	100 pcs./pack	3D CAD（Any Model）
S-8011W	Binary coded octal Real code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-8011	Binary coded octal Real code	Side setting	Without knob	100 pcs./pack	3D CAD（Any Model）
S-8111W	Binary coded octal Real code	Side setting	With knob (extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-8111	Binary coded octal Real code	Side setting	With knob (extended shaft)	100 pcs./pack	3D CAD（Any Model）
S-8030W	Binary coded octal Complementary code	Top setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-8030	Binary coded octal Complementary code	Top setting	Without knob	100 pcs./pack	3D CAD（Any Model）
S-8130W	Binary coded octal Complementary code	Top setting	With knob (extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-8130	Binary coded octal Complementary code	Top setting	With knob (extended shaft)	100 pcs./pack	3D CAD（Any Model）
S-8031W	Binary coded octal Complementary code	Side setting	Without knob	50 pcs./tray	3D CAD（Any Model）
S-8031	Binary coded octal Complementary code	Side setting	Without knob	100 pcs./pack	3D CAD（Any Model）
S-8131W	Binary coded octal Complementary code	Side setting	With knob (extended shaft)	50 pcs./tray	3D CAD（Any Model）
S-8131	Binary coded octal Complementary code	Side setting	With knob (extended shaft)	100 pcs./pack	3D CAD（Any Model）

Outline dimensions

(Unit:mm)

Terminal connection / p.c.b. through hole dimensions

(Unit:mm)

Packaging specifications

〈Tray packaging specifications〉

● Tray version is packaged in 50 pcs. per tray. Orders will be accepted for units of 50 pcs., i. e., 50, 100, 150 pcs. etc.
● Tray version is boxed with 10 trays.

〈Bulk pack specifications〉

● The smallest unit of bulk pack in a plastic bag is 10 pcs. per pack. Orders will be accepted for unit of minimum 10 pcs., i.e., 10, 20, 30 pcs., etc.
● Boxing of bulk in a plastic bag (top setting type) is performed with 50 pcs. (standard 100 pcs.) per box.