NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

Global-En

×

Toggle switch FT

●To buy this product, please go to the following Online Web stores.
To the Toggle switch“FT series” page on the DigiKey online shop
To the Toggle switch “FT series” page on the Chip1stop online shop
To the Toggle switch “FT series” page on the Farnell online shop

Ultra-Miniature Toggle Switch

 
FeaturesFeatures
  • Ultra-miniature toggle switch for high density mounting.

  • Washable.

  • Terminal pin pitch : 2.54 mm.

  • Independent detent mechanism ensures light operational feel.

  • Clip contact mechanism for long-term contact reliability.

  • Gold-plated contacts.

Part Number Designation

FTD -M- Z

Series

Actuator type

T: Toggle

No. of poles

1: 1 pole
2: 2 poles

Switching function

D: ON-ON
E: ON-OFF-ON
F: ON-(ON)
G: (ON)-OFF-(ON)

Terminal style

2: PC straight
5: PC R/A
4: PC V/M

Actuator shape

M: スタンダード

 

◆Terminal style

List of Part Numbers

 

 

 
 
Part No.CircuitTerminalsSW functionCAD
Part No.:FT1D-2M-Z SPDT PC straight ON-ON
Part No.:FT2D-2M-Z DPDT PC straight ON-ON
Part No.:FT1E-2M-Z SPDT PC straight ON-OFF-ON
Part No.:FT2E-2M-Z DPDT PC straight ON-OFF-ON
Part No.:FT1F-2M-Z SPDT PC straight ON-(ON)
Part No.:FT1G-2M-Z SPDT PC straight (ON)-OFF-(ON)
Part No.:FT1D-5M-Z SPDT PC R/A

ON-ON

Part No.:FT2D-5M-Z DPDT PC R/A

ON-ON

Part No.:FT1E-5M-Z SPDT PC R/A ON-OFF-ON
Part No.:FT1D-4M-Z SPDT PC V/M ON-ON
Part No.:FT2D-4M-Z DPDT PC V/M ON-ON
Part No.:FT1E-4M-Z SPDT PC V/M ON-OFF-ON
☆: Semi-standard products / 
★: Made to order products

Outline Dimensions

(Unit:mm)

Soldering Specifications

  • Manual Soldering Device:Soldering iron 380℃, Max.; 3 seconds, Max.
  • Auto Soldering Device:Jet wave type or dip type 275℃, Max.; 6 seconds, Max.
  • Pre-heating should be done at temperatures from 80 to 120℃ and within 120 sec.

  • When soldering two or more terminals to a common land, use solder resist to separate them.

Flux Cleaning

  • Solvent : Fluorine or Alcohol type.
  • Cleaning after soldering should be done after the PC board is exposed to room temperature (30℃ or below) for 1 to 2 hours.
  • Do not use ultrasonic cleaning.

Packaging Specification

(Unit:mm)

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top