Rocker switch SLE10K｜NIDEC COMPONENTS CORPORATION

Rocker switch SLE10K

Waterproof structure
The switches can be used in a place in wetting risk due to the internally sealed structure.
The panel sealing performance is equivalent to the IP64 rating.
Snap-in panel mounting
The switch can be fixed on the panel just by inserting it to the panel cutout from the front side.
Soldering and tab terminals
The switch is structured so that the use of the TAB receptacle (#187) or soldering of lead wires can be chosen.
UL , CSA and VDE approved products.

Rating	Load	Inductive load		Resistive load
	Inrush current （p.f.＝0.6）	125VAC	250VAC	125VAC 10A 250VAC 6A （p.f.＝1.0）
	Inrush current （p.f.＝0.6）	60A	36A
	Break current （p.f.＝0.9）	10A	6A
	Min. rating	AC/DC5V 10mA
Initial contact resistance		20mΩmax.（1A 2～4VDC）
Dielectric strength		1,500VAC 1 minute
Insulation resistance		100MΩ min. (500VDC)
Electrical life（cycles）		10,000 cycles		20,000 cycles
Operating force		3.92~12.7N
Operating temperature range		－25~＋85℃
Storage temperature range		－40~＋85℃

SLE	10	K	2 -	5-	Z
Series code	Current 10：10A	Switching function K:ON－OFF	Terminal style 2: #187 TAB（t=0.5）	Rocker design None 5 6 7

SLE

2 -

Series code

Current

10：10A

Switching function

K:ON－OFF

Terminal style

2: #187 TAB（t=0.5）

Rocker design

None
5
6
7

List of part numbers

Part number	Number of poles	Current	Switching function	Terminal style	Frame color and rocker color	CAD
☆SLE10K2－Z	2poles	10A	ON-OFF	#187 TAB（t=0.5）	Black	3D CAD（Any Model）
SLE10K2－5－Z	2poles	10A	ON-OFF	#187 TAB（t=0.5）	Black	3D CAD（Any Model）
SLE10K2－6－Z	2poles	10A	ON-OFF	#187 TAB（t=0.5）	Black	3D CAD（Any Model）
SLE10K2－7－Z	2poles	10A	ON-OFF	#187 TAB（t=0.5）	Black	3D CAD（Any Model）

(Unit:mm)

◆The waterproofing performance of SLE10K is equivalent to the IP64 rating, but the following precautions must be strictly observed:

Although the switch is waterproof-structured, do not use it under the environment where it is always exposed to water pressure (jet fl ow and under water).
Avoid the use in places where dust accumulates. The waterproof performance and operability may be deteriorated.

When the switch is used in a place where it may be exposed to water splash, mount the switch at a tilt of at least 35 degrees from the horizontal surface. (See Fig. 1.)
Mount the switch on the panel so that the thickness of packing is 1 mm or below. (See Fig. 2.)
Do not reuse the switch that is once mounted on a panel. Neglecting this caution may deteriorate the waterproofi ng performance.