Rocker switch SLE10K
- ●To make a purchase, contact Distributors below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
Miniature Power Rocker Switches
- Waterproof structure
The switches can be used in a place in wetting risk due to the internally sealed structure.
The panel sealing performance is equivalent to the IP64 rating. - Snap-in panel mounting
The switch can be fixed on the panel just by inserting it to the panel cutout from the front side. - Soldering and tab terminals
The switch is structured so that the use of the TAB receptacle (#187) or soldering of lead wires can be chosen. - UL , CSA and VDE approved products.
Specifications
|
Rating | Load |
Inductive load |
Resistive load | |
|---|---|---|---|---|
| Inrush current （p.f.＝0.6） |
125VAC | 250VAC | 125VAC 10A 250VAC 6A （p.f.＝1.0） |
|
| 60A | 36A | |||
| Break current （p.f.＝0.9） |
10A | 6A | ||
| Min. rating | AC/DC5V 10mA | |||
| Initial contact resistance | 20mΩmax.（1A 2～4VDC） | |||
| Dielectric strength | 1,500VAC 1 minute | |||
| Insulation resistance | 100MΩ min. (500VDC) | |||
| Electrical life（cycles） | 10,000 cycles | 20,000 cycles | ||
| Operating force | 3.92~12.7N | |||
| Operating temperature range | －25~＋85℃ | |||
| Storage temperature range | －40~＋85℃ | |||
Part number designation
| SLE | 10 | K | 2 - | 5- | Z |
|---|---|---|---|---|---|
|
Series code |
Current 10：10A |
Switching function K:ON－OFF |
Terminal style 2: #187 TAB（t=0.5） |
Rocker design None |
List of part numbers
| Part number | Number of poles | Current | Switching function | Terminal style | Frame color and rocker color | CAD |
|---|---|---|---|---|---|---|
| ☆SLE10K2－Z | 2poles | 10A | ON-OFF | #187 TAB（t=0.5） | Black | |
| SLE10K2－5－Z | 2poles | 10A | ON-OFF | #187 TAB（t=0.5） | Black | |
| SLE10K2－6－Z | 2poles | 10A | ON-OFF | #187 TAB（t=0.5） | Black | |
| SLE10K2－7－Z | 2poles | 10A | ON-OFF | #187 TAB（t=0.5） | Black |
Outline Dimensions
(Unit:mm)
Terminal Style
Panel Cut-Out Dimensions
Handling Precautions
◆The waterproofing performance of SLE10K is equivalent to the IP64 rating, but the following precautions must be strictly observed:
1. Waterproof performance (Equivalent to IP64 rating)
- Although the switch is waterproof-structured, do not use it under the environment where it is always exposed to water pressure (jet fl ow and under water).
- Avoid the use in places where dust accumulates. The waterproof performance and operability may be deteriorated.
2. Panel mounting
- When the switch is used in a place where it may be exposed to water splash, mount the switch at a tilt of at least 35 degrees from the horizontal surface. (See Fig. 1.)
- Mount the switch on the panel so that the thickness of packing is 1 mm or below. (See Fig. 2.)
- Do not reuse the switch that is once mounted on a panel. Neglecting this caution may deteriorate the waterproofi ng performance.
3. Soldering Specifi cations
- Manual Soldering
- Device: Soldering iron
- 380℃, Max.; 3 seconds, Max
Packaging Specification
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
Products
