NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

Global-En

×

Rotary coded switch S-1000A/2000A

●To buy this product, please go to the following Online Web stores.
To the Rotary coded switch “S-1000A/2000A series” page on the DigiKey online shop
To the Rotary coded switch “S-1000A/2000A series” page on the RS components online shop
To the Rotary coded switch “S-1000A/2000A series” page on the Chip1stop online shop
To the Rotary coded switch “S-1000A/2000A series” page on the Farnell online shop
To the Rotary coded switch “S-1000A/2000A series” page on the Mouser online shop

Pin compatible with conventional DIP switches

 

FeaturesFeatures
  • Protection against dust and whole cleaning after soldering is possible
  • Pin compatible with conventional DIP switches
  • Translucent knob with flange type (S-1200A/2200A series)
  • Distinguished visibility with translucent flange
  • Settable with fingers or screwdriver
  • In this series, material data sheets ideal for REACH-SVHC
    surveys etc. can be downloaded in chemSHERPA-AI format.
  • Download chemSHERPA-AI from the list of P/N below

Standard Specifications

Circuit type, Code format

10 positions (Real code, complementary code)
16 positions (Real code, complementary code)

Operating temperature range -40 ~ 85 °C
Storage temperature range -40 ~ 85 °C
Sealing Washable by “O” ring
Net weight

Approx. 0.87 g (S-1010A, S-1030A, S-2010A, S-2030A)
Approx. 1.13 g (S-1011A, S-1031A, S-2011A, S-2031A)
Approx. 0.97 g (S-1110A, S-1130A, S-2110A, S-2130A)
Approx. 1.23 g (S-1111A, S-1131A, S-2111A, S-2131A))
Approx. 1.02 g (S-1210A, S-1230A, S-2210A, S-2230A)))
Approx. 1.28 g (S-1211A, S-1231A, S-2211A, S-2231A)

Electrical Characteristics

Contact rating Non-switching: 100 mA 50 VDC
Switching: 100 mA 5 VDC
Minimum: 1 μA 20 VDC
Contact resistance 100 mΩ maximum
Insulation resistance 1000 MΩ (DC100 V) minimum
Dielectric strength 300 VAC, 60 s

Mechanical Characteristics

No. of positions 16 (S-1000A), 10 (S-2000A)
Adjustment torque 13 mN·m {133 gf·cm} min.
Stepping angle 22.5° (S-1000A), 36° (S-2000A)
Terminal strength 15 N {1.53 kgf} min.
Solderability 245 ± 3 °C, 2 ~ 3 s
Soldering heat Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum
Manual soldering: 380 ± 10 °C, 3 ~ 4 s

Environmental Characteristics

Vibration Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock 490 m/s2, 11 ms 6 directions for 3 times each
Load life 10000 steps DC5 V, 100 mA
Humidity (Steady state) Resistance load DC50V 100mA 60 °C, Relative humidity 90 ~ 95 %, 1000 h
High temperature exposure 85 °C, 1000 h
Low temperature exposure -40 °C, 96 h
Thermal shock -40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles

Part number designation

S -AW

Series name

No. of positions

1:16 positions

2:10 positions

Shape of rotor

0:Without knob

1:With knob (with extended shaft)

2:Translucent knob with flange (Black housing)

Code format

1:Real code

3:Complementary code

Setting position

0:Top setting

1:Side setting

 

Form of packaging

W:Tray packaging
Blank:Bulk in plastic bag

List of part numbers

 
 

 

 
 
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.09.00) can be downloaded from the popup for each P/N in the table below. *Need to log in to download.
Part No.Circuit, CodeSetting positionShape of rotorPackaging
spec
Material dataCAD
S-2010AW 10 pos. Real Top Without knob 50
pcs./tray
S-2010A 10 pos. Real Top Without knob 25
pcs./pack
S-2110AW 10 pos. Real Top With shaft knob 50
pcs./tray
S-2110A 10 pos. Real Top With shaft knob 25
pcs./pack
S-2210AW 10 pos. Real Top With translucent
knob※1
50
pcs./tray
S-2210A 10 pos. Real Top With translucent
knob※1
25
pcs./pack
S-2030AW 10 pos. Complementary Top Without knob 50
pcs./tray
S-2030A 10 pos. Complementary Top Without knob 25
pcs./pack
S-2130AW 10 pos. Complementary Top With shaft knob 50
pcs./tray
S-2130A 10 pos. Complementary Top With shaft knob 25
pcs./pack
S-2230AW 10 pos. Complementary Top With translucent
knob※1
50
pcs./tray
S-2230A 10 pos. Complementary Top With translucent
knob※1
25
pcs./pack
S-2011AW 10 pos. Real Side Without knob 50
pcs./tray
S-2011A 10 pos. Real Side Without knob 25
pcs./pack
S-2111AW 10 pos. Real Side With shaft knob 50
pcs./tray
S-2111A 10 pos. Real Side With shaft knob 25
pcs./pack
S-2211AW 10 pos. Real Side With translucent
knob※1
50
pcs./tray
S-2211A 10 pos. Real Side With translucent
knob※1
25
pcs./pack
S-2031AW 10 pos. Complementary Side Without knob 50
pcs./tray
S-2031A 10 pos. Complementary Side Without knob 25
pcs./pack
S-2131AW 10 pos. Complementary Side With shaft knob 50
pcs./tray
S-2131A 10 pos. Complementary Side With shaft knob 25
pcs./pack
S-2231AW 10 pos. Complementary Side With translucent
knob※1
50
pcs./tray
S-2231A 10 pos. Complementary Side With translucent
knob※1
25
pcs./pack
S-1010AW 16 pos. Real Top Without knob 50
pcs./tray
S-1010A 16 pos. Real Top Without knob 25
pcs./pack
S-1110AW 16 pos. Real Top With shaft knob 50
pcs./tray
S-1110A 16 pos. Real Top With shaft knob 25
pcs./pack
S-1210AW 16 pos. Real Top With translucent
knob※1
50
pcs./tray
S-1210A 16 pos. Real Top With translucent
knob※1
25
pcs./pack
S-1030AW 16 pos. Complemental Top Without knob 50
pcs./tray
S-1030A 16 pos. Complemental Top Without knob 25
pcs./pack
S-1130AW 16 pos. Complemental Top With shaft knob 50
pcs./tray
S-1130A 16 pos. Complemental Top With shaft knob 25
pcs./pack
S-1230AW 16 pos. Complemental Top With translucent
knob※1
50
pcs./tray
S-1230A 16 pos. Complemental Top With translucent
knob※1
25
pcs./pack
S-1011AW 16 pos. Real Side Without knob 50
pcs./tray
S-1011A 16 pos. Real Side Without knob 25
pcs./pack
S-1111AW 16 pos. Real Side With shaft knob 50
pcs./tray
S-1111A 16 pos. Real Side With shaft knob 25
pcs./pack
S-1211AW 16 pos. Real Side With translucent
knob※1
50
pcs./tray
S-1211A 16 pos. Real Side With translucent
knob※1
25
pcs./pack
S-1031AW 16 pos. Complementary Side Without knob 50
pcs./tray
S-1031A 16 pos. Complementary Side Without knob 25
pcs./pack
S-1131AW 16 pos. Complementary Side With shaft knob 50
pcs./tray
S-1131A 16 pos. Complementary Side With shaft knob 25
pcs./pack
S-1231AW 16 pos. Complementary Side With translucent
knob※1
50
pcs./tray
S-1231A 16 pos. Complementary Side With translucent
knob※1
25
pcs./pack
※1) With flange / Housing color: Black

Outline dimensions

(Unit:mm)

Terminal connection / P.C.B.Through hole dimensions

(Unit:mm)

Snap-in terminal pin with translucent knob with flange (Made to order basis)

● S-1200AK and S-2200AK


Packaging specification

〈Tray packaging specifications〉

● Tray version is packaged in 50 pcs. per tray. Orders will be accepted for units of 50 pcs., i. e., 50, 100, 150 pcs. etc.
● Tray version is boxed with 10 trays.

〈Bulk pack specifications〉

● The smallest unit of bulk pack in a plastic bag is 10 pcs. per pack.Orders will be accepted for unit of minimum 10 pcs., i.e., 10, 20, 30 pcs. , etc.
● Boxing of bulk in a plastic bag is performed with 25 pcs. (standard 50 pcs.) per box

Swithes with knob as extended shaft

● S-1200AK and S-2200AK



  • ※Knob can’t be dettached due to being fixed. 
       Simple knob can’t be sold.

     

  • The large knob is common to S-1000A, S-2000A, SA-5000 series.

     

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top