Lever&rocker switch 8M｜NIDEC COMPONENTS EUROPE GmbH

Lever&rocker switch 8M

●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.: SALES CHANNELClick here to check our Distributors.

Small Lever & Rocker Switches

FeaturesFeatures

The 8M Small Lever & Rocker Switch is similar to the 8A type except that 8M type has a mounting plate. Levers and rockers are available in four matted colors that give a sober atmosphere. Choose the suitable one for the panel design. For the mounting method, see the following figure.

Screw panel mount

Specifications

Rating Max.	Silver: 125VAC 6A / 250VAC 3A / 30VDC 4A Gold plated：20VDC 25mA
Initial contact resistance	Silver: 10mΩ Max.（2～4VDC 1A） Gold plated：20mΩ Max.（200 μVAC 1.5mA）
Initial dielectric strength	AC1500V　1Minute
Initial insulation resistance	1000MΩ Min. （500VDC）
Electrical life	Altternate type: 50,000 cycles　 Momentary type: 25,000 cycles
Operating temperature range	－30～＋85℃
Strage temperature range	－40～＋85℃

Part Numbering

8	M	1	01	1		- Z
Series	Actuator shape M: Small lever / rocker	No. of poles 1: 1 pole 2: 2 poles	Switching function 01: ON-ON	Terminal style 1: Solder	Contact material / Plating Blank: Bs+Ag or Cu+Ag / Silver plated / Silver plated Bs=Brass, Ag=Silver, Cu=Copper

- Z

Series

Actuator shape

M: Small lever / rocker

No. of poles

1: 1 pole

2: 2 poles

Switching function

01: ON-ON

Terminal style

1: Solder

Contact material / Plating

Blank:

Bs+Ag or Cu+Ag / Silver plated

/ Silver plated

Bs=Brass, Ag=Silver,
Cu=Copper

◆Terminal style

List of Part Numbers

Part No.	Number of poles	Switching function	UL	CSA	CAD
Part No.：8M1011-Z	SPDT	ON－ON	〇	〇	3D CAD（Any Model）
Part No.：8M2011-Z	DPDT	ON－ON	〇	〇	3D CAD（Any Model）
Part No.：8M3011-Z^☆	3PDT	ON－ON	〇	〇	3D CAD（Any Model）
Part No.：8M4011-Z^☆	4PDT	ON－ON	〇	〇	3D CAD（Any Model）

☆: Semi-standard products

Standard Accessories

Actuator	Part No.	Color
Lever	140000050427	White
	140000050428	Red
	140000050450	Gray
Rocker	140000480509	White
	140000480510	Red
	140000480511	Black

※

Specify either one of lever or rocker in part number when placing an order.

Outline Dimensions

(Unit:mm)

Mounting the Lever & Rocker

Press the selvage part of the lever/rocker with a screwdriver to fix it.

Handling Precautions

◆Soldering Specifications

Manual Soldering
Device : Soldering iron
①420℃, Max.; 3 sec., Max.
Auto Soldering
②275℃ ± 10℃, Max.; 5 seconds, Max.
Note that the above-stated soldering conditions should be applied to the PC terminal type only.

◆Flux Cleaning

For the solvent, use the fluorine- or alcohol-based solvent.
Solvent: Fluorine or Alcohol type
Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.

◆Mounting

Do not bend the terminals before mounting the switch on the PC board.
After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.

Documents

Environmental Data

RoHS CoC

●The above contents and descriptions are subject to change without notice.

Return previous page