Lever&rocker switch 8V-M
- ●To make a purchase, contact Distributors below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
Small Lever & Rocker Switches for PC Board
FeaturesFeatures
-
The 8V-M Small Lever & Rocker Switches for PC Board are designed for use with printed circuit boards.
-
It is easy to directly mount the switch on the PC board and the switch is provided with supporting bracket for stabilized switch
mounting. -
Levers and rockers are available in four matted colors that give an elegant atmosphere.
-
Choose the suitable one for the panel design.
- PCB mounting
Specifications
| Rating Max. | Silver: 125VAC 6A / 250VAC 3A / 30VDC 4A Gold plated：20VDC 25mA |
|---|---|
| Initial contact resistance | Silver: 10mΩ Max.（2～4VDC 1A） Gold plated：20mΩ Max.（200 μVAC 1.5mA） |
| Initial dielectric strength | AC1500V 1Minute |
| Initial insulation resistance | 1000MΩ Min. （500VDC） |
| Electrical life | Altternate type: 50,000 cycles Momentary type: 25,000 cycles |
| Operating temperature range | －30～＋85℃ |
| Strage temperature range | －40～＋85℃ |
Part Numbering
| 8 | V | 1 | 01 | 2 | - M | - Z | |
|---|---|---|---|---|---|---|---|
|
Series |
Installation V: For PCB |
No. of poles 1: 1 pole 2: 2 poles |
SW function 01: ON-ON 06: ON-(ON) |
Terminal style 2: PC straight |
Contact material / Plating Blank: Bs+Ag or Cu+Ag / Silver plated / Silver plated Bs=Brass, Ag=Silver, |
Actuator shape M: Small lever / |
◆Terminal style
List of part numbers
| Part No. | Circuit | Switching function | UL | CSA | CAD |
|---|---|---|---|---|---|
| Part No.：8V1012-M-Z | SPDT | ON－ON | 〇 | 〇 | |
| Part No.：8V2012-M-Z | DPDT | ON－ON | 〇 | 〇 | |
| Part No.：8V1062-M-Z★ | DPDT | ON－ON | 〇 | 〇 | |
| Part No.：8V2062-M-Z★ | DPDT | ON－(ON) | ― | ― |
★: Made to order products
Standard Accessories
| Actuator | Part No. | Color | Outline dimensions |
|---|---|---|---|
| Lever | 140000050427 | White |  |
| 140000050428 | Red | ||
| 140000050450 | Gray | ||
| Rocker | 140000480509 | White |  |
| 140000480510 | Red | ||
| 140000480511 | Black |
※
Specify either one of lever or rocker in part number when placing an order.
Outline Dimensions
(Unit:mm)
Lever or Rocker Installation Procedure
Insert the lever or the rocker provided onto the switch from the above.
PC Hole Layouts
Handling Precautions
◆Soldering Specifications
- Manual Soldering
Device : Soldering iron
①420℃, Max.; 3 sec., Max. - Auto Soldering
②275℃ ± 10℃, Max.; 5 seconds, Max.
Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
- For the solvent, use the fluorine- or alcohol-based solvent.
Solvent: Fluorine or Alcohol type - Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
- To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
Products
