Rotary coded switch S-7000
-
S-7000
-
S-7000
- ●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
Surface mount DIP Rotary coded switch
FeaturesFeatures
- Low profile of 2.9 mm
- Wide variety (top or side setting, 6, 10 or 16 positions,
J-hook, gull wing or throuhg hole pins) to choose from - Compatible with flow (top setting only) / reflow soldering
- Washable
- Resin materials are UL Recognized 94V-0 or 94V-1 equivalent
- In this series, material data sheets ideal for REACH-SVHC
surveys etc. can be downloaded in chemSHERPA-AI format. - Download chemSHERPA-AI from the list of P/N below
Standard Specifications
| Circuit type | BCD (Real code, Complementary code) BCH (Real code, Complementary code) |
|---|---|
| Operating temperature range | -40 ~ 85 °C |
| Storage temperature range | -40 ~ 85 °C |
| Sealing | Washable by “O” ring |
| Net weight | Approx. 0.26 g (A or B type in top setting)
Approx. 0.28 g (C type in top setting) Approx. 0.62 g (Side setting type) |
Electrical Characteristics
| Contact rating | Non-switching: 100 mA 50 VDC Switching: 100 mA 5 VDC Minimum: 1 μA 20 mVDC |
|---|---|
| Contact resistance | 100 mΩ maximum |
| Insulation resistance | 100 MΩ (100 VDC) minimum |
| Dielectric strength | 250 VAC, 60 s |
Mechanical Characteristics
| No. of positions | 6 positions (Real code) 10 positions (Real code, Complementary code) 16 positions (Real code, Complementary code) |
|---|---|
| Adjustment torque | 20 mN·m {204 gf·cm} maximum |
| Stepping angle | 60° (6 positions), 36° (10 positions), 22.5° (16 positions) |
| Solderability | 245 ± 3 °C, 2 ~ 3 s |
| Soldering heat | Reflow：255 °C(Peak temperature) Flow : 260 ± 3 °C, 5 ~ 6 s, two times maximum Manual soldering : 350 ± 10 °C, 3 ~ 4 s |
| Substrate bending | Width 90 mm, bend 3 mm, 5 s, 1 time |
| Shear (adhesion) | 5 N {0.51 kgf}, 10 s |
| Pull-off strength | 5 N {0.51 kgf}, 10 s |
{ }: Reference only
〈Reflow profile for soldering heat evaluation〉
Environmental Characteristics
| Vibration | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each |
|---|---|
| Shock | 490 m/s2, 11 ms, 6 directions for 3 times each |
| Load life | 10000 steps minimum, 100 mA 5 VDC |
| Humidity (Steady state) | 40 °C, Relative humidity 90 ~ 95 %, 240 h |
| High temperature exposure | 85 °C, 96 h |
| Low temperature exposure | -40 °C, 96 h |
| Thermal shock | -40 °C (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Part Number Designation
| S-7 | 0 | 1 | 0 | E | T | A |
|---|---|---|---|---|---|---|
|
Series name |
Shape of rotor 0:Without knob |
Circuit (Code) 1: 10 positions, real code |
Setting position 0: Top setting |
Terminal pin E: Au (Lead-free) |
Form of packaging T: Taping (Reel) |
Shape of terminal A: J-hook |
List of Part Numbers
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.09.00) can be downloaded from the popup for each P/N in the table below. *Need to log in to download.
| Part No. | Setting position | Shape of terminal | Circuit (Code) | Packaging spec | Material data | CAD |
|---|---|---|---|---|---|---|
| S-7060ETA | Top | J-hook | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7060EA | Top | J-hook | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7060ETB | Top | Gull wing | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7060EB | Top | Gull wing | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7010ETA | Top | J-hook | 10 positions, Real |
Taping, 500 pcs./reel |
||
| S-7010EA | Top | J-hook | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7010ETB | Top | Gull wing | 10 positions, Real |
Taping, 500 pcs./reel |
||
| S-7010EB | Top | Gull wing | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7010EWC | Top | Through hole | 10 positions, Real |
Tray, 50 pcs./tray |
||
| S-7010EC | Top | Through hole | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7011ETA★ | Side | J-hook | 10 positions, Real |
Taping, 500 pcs./reel |
||
| S-7011EA★ | Side | J-hook | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7011ETB★ | Side | Gull wing | 10 positions, Real |
Taping, 500 pcs./reel |
||
| S-7011EB★ | Side | Gull wing | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7011EWC★ | Side | Through hole | 10 positions, Real |
Tray, 50 pcs./tray |
||
| S-7011EC | Side | Through hole | 10 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7030ETA | Top | J-hook | 10 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7030EA | Top | J-hook | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7030ETB | Top | Gull wing | 10 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7030EB | Top | Gull wing | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7030EWC | Top | Through hole | 10 positions, Complementary |
Tray, 50 pcs./tray |
||
| S-7030EC | Top | Through hole | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7031ETA★ | Side | J-hook | 10 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7031EA★ | Side | J-hook | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7031ETB★ | Side | Gull wing | 10 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7031EB★ | Side | Gull wing | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7031EWC★ | Side | Through hole | 10 positions, Complementary |
Tray, 50 pcs./tray |
||
| S-7031EC | Side | Through hole | 10 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7050ETA | Top | J-hook | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7050EA | Top | J-hook | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7050ETB | Top | Gull wing | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7050EB | Top | Gull wing | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7050EWC | Top | Through hole | 6 positions, Real |
Tray, 50 pcs./tray |
||
| S-7050EC | Top | Through hole | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7051ETA★ | Side | J-hook | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7051EA★ | Side | J-hook | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7051ETB★ | Side | Gull wing | 6 positions, Real |
Taping, 500 pcs./reel |
||
| S-7051EB★ | Side | Gull wing | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7051EWC★ | Side | Through hole | 6 positions, Real |
Tray, 50 pcs./tray |
||
| S-7051EC★ | Side | Through hole | 6 positions, Real |
Plastic bag, 50 pcs./pack |
||
| S-7070ETA | Top | J-hook | 16 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7070EA | Top | J-hook | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7070ETB | Top | Gull wing | 16 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7070EB | Top | Gull wing | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7070EWC | Top | Through hole | 16 positions, Complementary |
Tray, 50 pcs./tray |
||
| S-7070EC | Top | Through hole | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7071ETA★ | Side | J-hook | 16 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7071EA★ | Side | J-hook | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7071ETB★ | Side | Gull wing | 16 positions, Complementary |
Taping, 500 pcs./reel |
||
| S-7071EB★ | Side | Gull wing | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
||
| S-7071EWC★ | Side | Through hole | 16 positions, Complementary |
Tray, 50 pcs./tray |
||
| S-7071EC★ | Side | Through hole | 16 positions, Complementary |
Plastic bag, 50 pcs./pack |
- ★: Made to order products
- Taping and tray version can be supplied only in reel or tray unit.
Code Format
Outline Dimensions
(Unit:mm)
Recommended P.C.B. Pad Outline Dimensions
(Unit:mm)
Size of P.C.B. Processing
(Unit:mm)
Packaging specifications
〈Taping packaging specifications〉
● Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500, pcs., etc.
● Taping version is boxed with one reel (500 pcs.).
● Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the diagrams below:
(Unit:mm)
-
● Embossed tape dimensions
-
● Reel dimensions
(Conforms to JIS C 0806-3, In accordance with EIAJ ET-7200A)
-
●S-70□□ETA
< Top setting >
-
< Side setting >
-
●S-70□□ETB
<Top setting >
-
< Side setting >
〈Tray packaging specifications〉
● Tray version is packaged in 50 pcs. per tray. Orders will be accepted for units of 50 pcs., i. e., 50, 100, 150 pcs. etc.
● Tray version is boxed with 10 trays.
〈Bulk pack specifications〉
● The smallest unit of bulk pack in a plastic bag is 10 pcs. per pack. Orders will be accepted for unit of minimum 10 pcs., i.e., 10, 20, 30 pcs., etc.
● Boxing of bulk in a plastic bag (top setting type) is performed with 5pcs. (standard 200 pcs.) per box. Only that side setting type is 100 pcs. (standard 200 pcs.) per box.
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
Products
