NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Polymer Resettable Circuit Protector
PRCP-ASML/X

Easy to reduce the heat production and ensure the specified voltage, because of the low voltage drop.

 

FeaturesFeatures
  • Surface mount packaging for automated assembly

  • Tiny footprint size 1005 mm (0402 mils) and low profile for space-constrained mobile applications

  • Ultra-low resistance, quick response

  • RoHS compliant and halogen free

  • Agency recognition: cULus , TÜV

*Click here for information on the other NSML/X series.

Electrical Characteristics

ModelVmax (V)Imax (A)Ihold ItripResistance
(A) at 23 ℃(Ω) at 23 °C
HoldTripRminR1max
PRCP-ASML010/6 6 50 0.10 0.3 0.15 3.0
PRCP-ASML020/6 6 50 0.20 0.5 0.10 1.6
PRCP-ASML035/6 6 50 0.35 0.7 0.05 0.85
PRCP-ASML050/6 6 50 0.50 1.0 0.04 0.50

Thermal Derating Table - I hold (Amps)

ModelAmbient operating temperature
-40 ℃-20 ℃0 ℃23 ℃40 ℃50 ℃60 ℃70 ℃85 ℃
PRCP-ASML010/6 0.16 0.14 0.12 0.10 0.08 0.07 0.06 0.05 0.04
PRCP-ASML020/6 0.32 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08
PRCP-ASML035/6 0.56 0.49 0.42 0.35 0.28 0.24 0.21 0.17 0.14
PRCP-ASML050/6 0.80 0.70 0.60 0.50 0.40 0.35 0.30 0.25 0.20

Environmental Characteristics

ItemConditionCriteria
Operating Temperature -40 ℃ to +85 ℃  
Passive Aging +85 ℃, 1000 hours ± 10% typical resistance change
Humidity Aging +85 ℃, 85%R.H. 24 hours ± 30% typical resistance change
Thermal Shock -40 ℃ to +85 ℃, 20 times ± 30% typical resistance change
Solvent Resistance MIL-STD-202, Method 215 No change
Vibration MIL-STD-883C, Method 2007.1 Condition A No change (R min  < R < R 1max )

Test Procedures and Requirements

ItemTest ConditionAccept/Reject Criteria
Visual/Mechanical Verify dimensions and materials Per P.R.C.P. physical description
Resistance In still air @23℃ Rmin ≤ R ≤ R1max
Time to Trip At specified current, Vmax , 23 ℃, still air T ≤ max. time to trip (seconds)
Hold Current 30 min. at Ihold , still air No trip
Trip Cycle Life Vmax , Imax , 100 cycles No arcing or burning
Trip Endurance Vmax , Imax , 48 hours No arcing or burning
Solderability 245 ℃ ± 5 ℃, 5 seconds 95% min. coverage

Product Dimensions

  • ● Style 1
    Terminal material: ENIG-plated terminals
  • ● Style 2
    Terminal material: ENIG-plated terminals
(Unit: mm)
ModelStyleABCD
ASML010/6 1 Min. 0.85
Max. 1.15
Min. 0.35
Max. 0.65
Min. 0.20
Max. 0.60
Min. 0.10
ASML020/6 2
ASML035/6
ASML050/6
(Unit: inch)
ModelStyleABCD
ASML010/6 1 Min. 0.033
Max. 0.045
Min. 0.014
Max. 0.026
Min. 0.008
Max. 0.024
Min. 0.004
ASML020/6 2
ASML035/6
ASML050/6

Recommended Pad layout

  • Unit: 
  • mm
     (inch) 

Solder Reflow Recommendations

  • PRCP-ASML/X models are intended for reflow soldering (including, not limited to heating plate, hot air, IR, nitrogen, and vapor phase).
  • Wave soldering is permissible only if the device is on the top of the PCB, opposite the heat source.
  • Hand soldering is not recommended for these devices.
  • All temperatures refer to the topside of the device, measured on the device body surface.
  • If reflow temperatures exceed the recommended profile, devices may not meet the published specifications.
  • Compatible with Pb and Pb-free solder reflow profiles.
  • Excess solder may cause a short circuit.
Profile FeaturePb-Free Assembly
Average Ramp-Up Rate (Tsmax to Tp) 3 ℃ /second max.
PREHEAT
Temperature Min (Tsmin)
Temperature Min (Tsmax)
Time  (Tsmin to Tsmax) (ts)

150 ℃
200 ℃
60 〜 180 seconds
TIME MAINTAINED ABOVE:
Temperature (TL)
Time (TL)

217 ℃
60 〜 150 seconds
Peak Temperature (Tp) 260 ℃
Time within 5℃ of Actual Peak Temperature (tp) 20 〜 40 seconds
Ramp-Down Rate 6 ℃ /second max.
Time 25℃ to Peak Temperature 8 minutes max.

*Click here for information on the other NSML/X series.

Warranty

The Warranty period for the product shall be one year. A failure due to causes attributed to design or manufacturing defects during the period one year from the date of delivery shall be repaired or replaced free of charge.
However, the following shall be excluded from the warranty:

Failure or damage caused by improper use and careless operation in violation of the catalog and specification.

Failure or damage caused by inappropriate modification, adjustment, or repair.
Failure or damage caused by technically and sci en tif i cally unpredictable factors.
Failure or damage caused by acts of God, fire, or other unavoidable accidents.

The term “Warranty” herein referred to shall imply the warranty for the product unit only, and damages from failure of the product shall be excluded.
This product is not intended to be used for equipment that may cause direct harm to life or body, or equipment that may cause significant physical damage. (Aerospace and space related equipment, railway vehicles, nuclear power equipment, military equipment, etc.) We are not liable for any damages arising from the use of this product for purposes not intended by us.
Furthermore, we ask you to perform a swift incoming inspection for delivered products and we wouldalso appreciate if full attention is given to the storage conditions of the product.

Environmental Certificate

●The above contents and descriptions are subject to change without notice. 

Products

×

page top