Lever & Rocker switch 8H
- ●To buy this product, please go to the following Online Web stores.
Lever & Rocker Switches
FeaturesFeatures
The 8H Lever & Rocker Switches feature the snap-in mount type on the panel, which enables side-by-side mounting. For the actuator, either of the lever or the rocker can be chosen according to applications and four colors are available for the actuator and the mounting frame, respectively. Choose the suitable one for the panel design.
Specifications
| Rating Max. | Silver: 125 VAC 6 A / 250 VAC 3 A / 30 VDC 4 A Gold plated：20 VDC 25 mA |
|---|---|
| Initial contact resistance | Silver: 10 mΩ Max. (2～4 VDC 1 A) Gold plated: 20 mΩ Max. (200 μVAC 1.5 mA) |
| Initial dielectric strength | 1500 VAC 1 Minute |
| Initial insulation resistance | 1000 MΩ Min. (500 VDC) |
| Electrical life | Altternate type: 50,000 cycles Momentary type: 25,000 cycles |
| Operating temperature range | ｰ30～＋85 ℃ |
| Strage temperature range | ｰ40～+85 ℃ |
Part Number Designation
| 8 | H | 1 | 01 | 1 | C | - Z |
|---|---|---|---|---|---|---|
|
Series |
Actuator shape H: Lever / Rocker |
No. of poles 1: 1 pole 2: 2 poles 3: 3 poles 4: 4 poles |
Switching function 01: ON-ON 02: ON-OFF-ON 04: (ON)-OFF-(ON) 06: ON-(ON) |
Terminal style 1: Solder 2: PC straight |
Contact material / Plating Blank: Bs+Ag or Cu+Ag / Silver plated (Ag) / Silver plated (Ag) C: Bs+Ag or Cu+Ag / Gold plated (Ni+Au) / Gold plated (Ni+Au) Bs=Brass, Ag=Silver, Cu=Copper, |
◆Terminals
List of Part Numbers
| Part No. | No. of poles | Terminals | SW function | CAD |
|---|---|---|---|---|
| Part No.：8H1011-Z | 1 pole | Solder | ON－ON | |
| Part No.：8H1011C-Z☆ | 1 pole | Solder (Gold plated) | ON－ON | |
| Part No.：8H1021-Z☆ | 1 pole | Solder | ON－OFF－ON | |
| Part No.：8H1041-Z | 1 pole | Solder | (ON)－OFF－(ON) | |
| Part No.：8H1061-Z | 1 pole | Solder | ON－(ON) | |
| Part No.：8H1012-Z★ | 1 pole | PC Straight | ON－ON | |
| Part No.：8H2011-Z | 2 poles | Solder | ON－ON | |
| Part No.：8H2021-Z★ | 2 poles | Solder | ON－OFF－ON | |
| Part No.：8H2041-Z★ | 2 poles | Solder | (ON)－OFF－(ON) | |
| Part No.：8H2012-Z★ | 2 poles | PC Straight | ON－ON | |
| Part No.：8H2062-Z★ | 2 poles | PC Straight | ON－(ON) |
☆: Semi-standard products /
★: Made to order products
★: Made to order products
Accessories
※
For standard accessories, specify either of the lever or the rocker in part number.
Outline Dimensions
(Unit:mm)
Panel Cut-Out Dimensions
Lever / Rocker and Mounting Frame Installation Procedure
-
◆Lever and Rocker
-
◆Mounting frame
To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.※To mount the switch on the panel, press in the switch from the panel side with uniform pressure on the right and left.
PC Hole Layouts
Handling Precautions
◆Soldering Specifications
- Manual Soldering
Device : Soldering iron
①420℃, Max.; 3 sec., Max. - Auto Soldering
②275℃ ± 10℃, Max.; 5 seconds, Max.
Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
- For the solvent, use the fluorine- or alcohol-based solvent.
Solvent: Fluorine or Alcohol type - Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
- To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
