Toggle switch 8G
- ●To buy this product, please go to the following Online Web stores.
Washable Short Toggle
-
The 8G Washable Toggle Switch is designed for PC boards and are easily mountable on the board. A PC support terminal is provided for stable mounting. The processsealed structure allows cleaning after soldering.
-
Suitable for applications where panel space is limited and a larger toggle is needed.
-
Terminal style : PC Straight, Right angle and vertical mount PC terminals
-
Epoxy resin case : UL94V-0 self-extinguishing epoxy.
-
Insulation between terminal and ground : 4 mm minimum. Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent the entry of solder and flux.
-
Insulation barrier : Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.
-
UL Recognized product File No.E43275 CSA Certified product File No.LR38341
Part number designation
| 8 | G | 1 | 01 | 1 | C- | Z |
|---|---|---|---|---|---|---|
|
Series code |
Actuator shape G: Washable
|
Number of poles 1:1 pole |
Switching function 01:ON-ON |
Terminals 2:PC Straight |
Contact material/Plating None:Bs＋Ag or Cu＋Ag/Ag C:Bs＋Ag or Cu＋Ag/Ni＋Au
Bs=Brass |
◆Terminals
List of part numbers
| Part number | Circuit | Terminals | Switching function | CAD |
|---|---|---|---|---|
| 8G1012－Z | SPDP | PC Straight | ON-ON | |
| 8G1022－Z | SPDP | PC Straight | ON-OFF-ON | |
| 8G1042－Z | SPDP | PC Straight | (ON）-OFF-(ON） | |
| 8G2012－Z | DPDT | PC Straight | ON-ON | |
| 8G1014－Z | SPDP | Right Angle | ON-ON | |
| ★ 8G1024－Z | SPDP | Right Angle | ON-OFF-ON | |
| ☆ 8G1064－Z | SPDP | Right Angle | ON-(ON） | |
| 8G2014－Z | DPDT | Right Angle | ON-ON | |
| 8G1016－Z | >SPDT | Vertical Mount | ON-ON | |
| 8G2016－Z | DPDT | Vertical Mount | ON-ON |
（ON）：Momentary. ☆：Semi-standard products. ★：Made to order products.
Common Specifications
| Rating Max. | AC125V 6A AC250V 3A DC30V 4A |
|---|---|
| Initial contact resistance | 10mΩ Max. （DC2～4V 1A） |
| Initial dielectric strength | AC1500V 1minute |
| Initial insulation resistance | 1000MΩMin. （ DC500V） |
| Electrical life | Alternate type:50,000cycles Momentary type:25,000cycles |
| Operating temperature range | －30～＋85℃ |
| Storage temperature range | －40～＋85℃ |
Precautions
Soldering Specifications
- Manual soldering/Device：Solder iron ①350℃ Max. 3 sec. Max.②310℃ Max. 7 sec. Max.
- Auto soldering/Device：Jet wave or dip type ①270℃ Max. 5 sec. Max. ②250℃ Max. 7 sec. Max.
- Pre-heating should be done at temperatures below 100℃ and within 30 seconds.
Flux Cleaning
- Solvent : Fluorine or Alcohol type.
- Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for fi ve minutes or longer at room temperature.
- Do not use the ultrasonic cleaning.
Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
- Mount the accessories after soldering and fl ux cleaning.
PC Hole Layouts
8 Series Toggles Selection Table
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
