Pushbutton switch 8N
- ●To buy this product, please go to the following Online Web stores.
Standard Pushbutton Switches
-
The 8N standard pushbutton switch is the basic type of “8”Series. Momentary and alternate functions are available.Color button is available in 8mm, 10mm and 15mmdiameter and in 4 colors.
-
Silver or gold-plated contacts
-
Epoxy resin case UL94V-0 self-extinguishing epoxy.
-
Insulation between terminal and ground: 4 mm minimum.
-
Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent short-circuiting between poles ensuring high reliability
-
Insulation barrier: Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.
Part Number Designation
| 8 | N | 1 | 01 | 1 | C | - Z |
|---|---|---|---|---|---|---|
|
Series |
Actuator shape A: Standard Pushbutton |
No. of poles 1: 1 pole 2: 2 poles 3: 3 poles 4: 4 poles |
Switching function 01: ON-ON 02: ON-(ON) |
Terminal style 1: Solder 2: PC straight |
Contact material / Plating Blank: Bs+Ag or Cu+Ag / Silver plated (Ag) / Silver plated (Ag) C: Bs+Ag or Cu+Ag / Gold plated (Ni+Au) / Gold plated (Ni+Au) Bs=Brass, Ag=Silver, Cu=Copper, |
◆Terminals
List of Part Numbers
| Part No. | No. of poles | SW function | Terminals | CAD |
|---|---|---|---|---|
| Part No.：8N1011-Z | 1 pole | ON－ON | Solder | |
| Part No.：8N2011-Z☆ | 2 poles | ON－ON | Solder | |
| Part No.：8N3011-Z★ | 3poles | ON－ON | Solder | |
| Part No.：8N4011-Z▲ | 4poles | ON－ON | Solder | |
| Part No.：8N1021-Z | 1 pole | ON－(ON) | Solder | |
| Part No.：8N1021C-Z▲ | 1 pole | ON－(ON) | Solder (Gold plated) | |
| Part No.：8N2021-Z | 2 poles | ON－(ON) | Solder | |
| Part No.：8N3021-Z★ | 3poles | ON－(ON) | Solder | |
| Part No.：8N4021-Z★ | 4poles | ON－(ON) | Solder | |
| Part No.：8N2012-Z★ | 2 poles | ON－ON | PC Straight | |
| Part No.：8N2022-Z☆ | 2 poles | ON－(ON) | PC Straight | |
| Part No.：8N1022-Z☆ | 1 pole | ON－(ON) | PC Straight |
★: Made to order products /
▲: Ask for details
Specifications
| Max. rating | 6A 125VAC/3A 250VAC/4A 30VDC |
|---|---|
| Initial contact resistance | 10mΩmax.(1A 2～4VDC） |
| Initial dielectric strength | 1,500VAC 1 minute |
| Initial insulation resistance | 1,000MΩ min. (500VDC） |
| Electrical life | Alternate type 40,000 operations Momentary type 25,000 operations |
| Oepmepraetriantgu re range | －30℃～＋85℃ |
| Setmorpaegrea ture range | －40℃～＋85℃ |
Outline Dimensions
(Unit:mm)
Panel Cut-Out Dimensions
PC Hole Layouts
Handling Precautions
◆Soldering Specifications
- Manual Soldering
Device : Soldering iron
①420℃, Max.; 3 sec., Max. - Auto Soldering
②275℃ ± 10℃, Max.; 5 seconds, Max.
Note that the above-stated soldering conditions should be applied to the PC terminal type only.
◆Flux Cleaning
- For the solvent, use the fluorine- or alcohol-based solvent.
Solvent: Fluorine or Alcohol type - Since the 8 Switch Series switches are not waterproof-structured, if the PC board is to be cleaned, clean the soldering surface of substrate with a brush so that the switch is not exposed to the cleaning solution.
◆Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on the knob of the switch.
- To fix the PC terminal type, solder it on the PC board after fixing the switch body on the panel with the screw.
UL recognized, CSA certified Products
Outline Dimension
(Unit:mm)
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
