Pushbutton switch 8R-N
-
●To buy this product, please go to the following Online Web stores.
Soft Touch Pushbutton Switches
- The 8R Soft-Touch Pushbutton switches has a unique snap action structure which provides light and soft tactile
feel. - The short travel distance (Alternate action: 2.5 mm,Momentary: 1 mm) and the low-profile design make the 8R
series suitable for applications where panel space is limited. - Silver or gold-plated contacts
- Epoxy resin case UL94V-0 self-extinguishing epoxy.
- Insulation between terminal and ground: 4 mm minimum.
- Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent short-circuiting between poles ensuring high reliability
- Insulation barrier: Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability.
Specifications
| Rating | Silver plated:3A 125VAC （Resistive load） Gold plated:60mA 30VDC max.（Resistive load） |
|---|---|
| Initial contact resistance | Silver plated:10mΩ max（. 1A 2～4VDC） Gold plated:20mΩ max（. 5mA 200μVAC） |
| Initial Dielectric strength | 1,000VAC 1 minute |
| Initial insulation resistance | 1,000MΩ min. （500VDC） |
| Electrical life | 25,000 operations（ 50,000 operations:Gold plate） |
| Operating temperature range | －20℃～＋85℃ |
| Storage temperature range | －40℃～＋85℃ |
| Operating force | Alternate type 8R101■－N－Z：3.92±1.96N/8R201■－N－Z：4.9±2.94N Momentaly type 8R102■－N－Z2.94±0.98N/8R202■－N－Z 4 . 9 ± 1.96N |
Part Numbering
| 8 | R | 1 | 01 | 1 | B | - | Z |
| Series code |
Actuator shape N:Standard P:Splash proof Y:Mustang R:Soft Touch W:Snap-in |
Number of poles 1: 1 2: 2 |
Switching function 01: ON-ON 02: ON-(ON) |
Terminal style 1: Solder 2: PC/Straight |
Contact material /Plating None：Bs+Ag or Cu+Ag/Ag B: Bs or Cu/Ni+Au C:Bs+Ag or Cu+Ag/Ni+Au |
Note ：Some combinations may not be available. Please check the "Tableof Part Numbers" for each series.
List of part numbers
| Part number | Plating | Number of poles | Switching function | Terminal style | CAD |
|---|---|---|---|---|---|
| 8R1011－N－Z | Silver plated | 1 pole | ON － ON | Solder | |
| ★8R2011－N－Z | Silver plated | 2 poles | ON － ON | Solder | |
| 8R1021－N－Z | Silver plated | 1 pole | ON －（ON） | Solder | |
| 8R1021B－N－Z | Gold plated | 1 pole | ON －（ON） | Solder | |
| 8R2021－N－Z | Silver plated | 2 poles | ON －（ON） | Solder | |
| ★8R2021B－N－Z | Gold plated | 2 poles | ON －（ON） | Solder | |
| 8R1022－N－Z | Silver plated | 1 pole | ON －（ON） | PC Straight | |
| ☆8R1022B－N－Z | Gold plated | 1 pole | ON －（ON） | PC Straight | |
| 8R2022－N－Z | Silver plated | 2 poles | ON －（ON） | PC Straight | |
| ★8R2022B－N－Z | Gold plated | 2 poles | ON －（ON） | PC Straight |
★：Made to order products. ☆：Semi-standard products. （ON）：Momentary.
Outline Dimensions
(Unit:mm)
Terminal Styles
PC Hole Layouts
Panel Cut－Out Dimensions
Soldering Specifications
- Manual soldering
Device：Solder iron
①420℃ Max. 3 sec. Max. - Auto soldering
②The above-stated soldering conditions shall apply only to switches with straight terminals. Auto soldering is not possible with right-angle terminals.
Switches with right-angle terminals should be soldered manually according to the conditions specified in (1) above. - When putting the switches through an aging process after they were soldered onto the printing board or after installed into a complete end product, be sure to remove the buttons ofthe switches.,
Mounting
- Do not bend the terminals before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
- For switches with straight terminals, solder the switch on the PC board after fixing the switch on the panel with a nut.
Flux Cleaning
- Solvent : Fluorine or Alcohol type.
- 8A/B/C/D/E/F/J/S series are not washable. To wash the PC board, clean the soldering surface of the PC board
with a brush so that the switch is not exposed to the cleaning solution.
UL-Recognized, CSA certified Products
Packaging Specification
(Unit:mm)
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
