Druckmessgerät PG-30｜NIDEC COMPONENTS EUROPE GmbH

Druckmessgerät PG-30

PG-30

PG-30

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Pressure gauge PG-30

Compact and lightweight general-purpose pressure gauges
Innovative general-purpose gauges of compact design (30mm sq.) and drip-proof structure (IP65).
Clear indication by LED
Easy-to-see LED assures clear readings on the panel and even in a dark place.
Various modes and units can be selected according to applications
Eight different pressure units
Three analog output modes
Eight switch output modes
Meet EMC standards
EN 55011 (EMI)
EN 61326-1 (EMS)
Low consumption by nondisplay mode
Set data protection by panel lock function

General specifications

Unless otherwise specified, the specs are defined at an ambient temperature of 25±5 °C and excitation voltage of 12 V DC.

Item	101R	102R	103R
Pressure reference	Gauge
Pressure medium	Non-corrosive gases
Rated pressure range	−10 ~10 kPa	−100~100 kPa	−100~1000 kPa
Maximum pressure	20kPa	200kPa	1500kPa
Break-down pressure	50kPa	500kPa	2000kPa
Operating temp. range	-10~50°C
Compensated temp. range	0~50°C
Operating humidity	35~85%RH
Protection grade	In accordance with IEC IP65
Pressure port	2-Rc 1/8
Material of pressure port attachment	Aluminum die-casting, silicone
Net weight	Approx. 80（Including 2 m cable)
Thermal error	± 3 %F.S. (0 ~ 50 °C)
Insulation resistance	100 (DC 500 V) MΩ minimum
Dielectric strength	AC500 V　1 minute（Leakage current 1 mA maximum
Input voltage	10.8~30 V DC（Including ripple percentage)
Consumption current	50mA maximum
Accessories	Seal screw, M 5 connecting joint screw

Display

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 V DC.

Item	101R	102R	103R
Display element	Full 3-digit LED
Rated display range	− 9.99~9.99 kPa	− 99.9~99.9 kPa	− 100~999 kPa
Multiplier settings	Max. 11 settings
Negative pressure display	Red LED is ON.
Display accuracy	± 1 %

Switch output

Output status	NPN/PNP　2-point output (Transistor, Open collector output)
Output mode	Separate mode / window comparator mode
Switching capacity	30 V DC 100 mA　Short-circuit protection
Residual voltage	1.2 V maximum (NPN), 2.2 V maximum (PNP)（At load current of 100 mA）
State indication	Output 1 (Green LED),Output 2 (Red LED),Lighted when output is ON.
Switch hysteresis	0~300 counts（Adjustable)
Repeatability	± 0.2 %F.S. ± 1 count (± 0.3 %F.S. maximum)
Response	Approx. 5, 25, 250, 2500 ms　Adjustable

Analog output

Output mode	3 modes
Output voltage V zero : Pin=0, V span : Pin=0 〜Pin (H)	1~5 V (G/V mode ZERO : 1 ± 0.2 V, SPAN : 4 ± 0.2 V R mode ZERO : 3 ± 0.2 V, SPAN : 2 ± 0.2 V) 103 R (R mode) (ZERO : 1.36 ± 0.2 V, SPAN : 3.64 ± 0.2 V)
Impedance	10 kΩ
Resolution	1/204
Response	Approx. 5, 25, 250, 2500 ms　Adjustable

ENVIRONMENTAL CHARACTERISTICS

Test item	Test conditions	Permissible change
Vibration	10~500 Hz, 98.1 m/s2 or 1.5 mm P-P, 3 directions for 2 hours each	Amount of analog output fluctuation is permitted by adding conversion error of 20 mV. ※ 1
Shock	490 m/s2 , 3 directions for 3 times each
Moisture resistance	40 °C, 90~95 %RH, 240 hrs
Pressure cycling	0~Rated pressure, 106 cycles

※１Change in the pressure indication, switch operating points and analog output.

MODEL NUMBER DESIGNATION

PG-30-	101	R-	N
Series name	Pressure range　 101:-10~10 kPa 102:-100~100 kPa 103:-100~1000 kPa	Pressure reference R:Compound pressure (Negative pressure~Positive pressure)	Switch output interface N:NPN open collector P:PNP open collector

PG-30-

101

R-

Series name

Pressure range　

101:-10~10 kPa

102:-100~100 kPa

103:-100~1000 kPa

Pressure reference

R:Compound pressure

(Negative pressure~Positive pressure)

Switch output interface

N:NPN open collector

P:PNP open collector

LIST OF MODEL NUMBERS

Model number	Rated pressure range	Switch output interface	Pressure reference	Fitting	CAD
PG-30-101R-N	−10~10 kPa	NPN	Gauge	Rc 1/8	3D CAD（Any Model）
PG-30-101R-P	−10~10 kPa	PNP	Gauge	Rc 1/8	3D CAD（Any Model）
PG-30-102R-N	−100~100 kPa	NPN	Gauge	Rc 1/8	3D CAD（Any Model）
PG-30-102R-P	−100~100 kPa	PNP	Gauge	Rc 1/8	3D CAD（Any Model）
PG-30-103R-N	−100~1000 kPa	NPN	Gauge	Rc 1/8	3D CAD（Any Model）
PG-30-103R-P	−100~1000 kPa	PNP	Gauge	Rc 1/8	3D CAD（Any Model）

INTERNAL ELECTRICAL SCHEMATICS

SELECTION OF DISPLAY MULTIPLIER

The last digit/letter represents the selection code : Blinking red LED indicates negative pressure.

Diagonal column: Display multiplier cannot be selected due to resolution and number of digits.
(Selection code is not indicated either.)
Selection code is set at “1” prior to shipment.

ANALOG OUTPUT MODE

When shipped from our factory-101R : R mode is set at “1”, 102R : V mode is set at “3” and 103R : G mode is set at “2”.
The above 3 types can be set at “1”, “2” or “3”. However, the accuracy at V mode of 103R can’t be guaranteed.

SWITCH OUTPUT MODE

Note 1. In the Separate Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2.
Note 2. In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Setting 2.

OUTLINE DIMENSIONS

ACCESSORIES (Sold separately)

Name	Series name	Contents	Applicable model
Rear panel bracket set	ACPG-001	Rear panel bracket and M 3 × 4 male screw (2pcs.)	PG-30
Panel bracket set	ACPG-002	Panel bracket and M 3 × 4 male screw (2pcs.)	PG-30
Panel holder set	ACPG-003	Panel holder cover Panel holder Panel stopper (2pcs.)	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L
Holder cover set (For protecting gauge operating panel)	ACPG-004	Panel holder cover Panel holder	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L
Holder stopper set	ACPG-007	Panel holder Panel stopper (2pcs.)	PG-30 · PG-35 · PG-75 · PG-35H · PG-35L