NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Trimmpotentiometer RJ-5

14 TURNS CERMET TRIMMERS

 

FeaturesFeatures
  • Fine setting is possible
  • Sealed construction
  • Resin material is UL Recognized 94V-0 (Excluding adhesives)
  • In this series, material data sheets ideal for REACH-SVHC
    surveys etc. can be downloaded in chemSHERPA-AI format.
  • Download chemSHERPA-AI from the list of P/N below

ELECTRICAL CHARACTERISTICS

Power ratings 0.25 W (85 °C) 0 W (120 °C)
Nominal resistance range 10 Ω ~ 2 MΩ
Resistance tolerance ± 10 %
Resistance law Linear law(B)
Maximum input voltage DC200 V or power rating, whichever is smaller
Maximum wiper current 100 mA or power rating, whichever is smaller
Effective electrical turn 11 turns
End resistance 1 % or 2 Ω , whichever is greater
C.R.V. 1 % or 3 Ω , whichever is greater
Operating temp. range −55 ~ 120 °C
Temp. coefficient ± 100 10-6/°C maximu10 Ω ~ 50 Ω : ± 250 10-6/°C maximum
100 Ω ~ 2 MΩ : ± 100 10-6/°C maximum
Insulation resistance 1000 MΩ minimum (DC500 V)
Dielectric strength AC600 V, 60 s
Net weight Approx. 0.37 g

MECHANICAL CHARACTERISTICS

Mechanical turn 14 turns
Operating torque 20 mN·m {204 gf·cm} maximum
Mechanical stop Clutch action
Rotational life 200 cycles
10 Ω ~ 200 Ω [ΔR/R ≦ ± (0.5 Ω +3 %)]
500 Ω ~ 2 MΩ [ΔR/R ≦ ± (0.5 Ω +2 %)]
Terminal strength 10 N {1.02 kgf} minimum(Tensile strength)
Thrust to shaft 5 N {0.51 kgf} minimum
Solderability 245 ± 3 °C, 2 ~ 3 s

{ }:Reference only

ENVIRONMENTAL CHARACTERISTICS

Test itemTest conditionsSpecifications
Shock 981 m/s2, 6 ms 6 directions for 3 times each [ΔR/R ≦ 1 %] [S.S. ≦ 1 %]
Thermal shock −65 ~ 125 °C(0.5 h), 5 cycles [ΔR/R ≦ 1 %] [S.S. ≦ 1 %]
Humidity −10 ~ 65 °C ( Relative humidity 80 ~ 98 %),10 cycles, 240 h [ΔR/R ≦ 1 %]
Vibration Amplitude 1.52 mm or Acceleration 196 m/s2,
10 ~ 2000 Hz, 3 directions, 12 times each
[ΔR/R ≦ 1 %] [S.S. ≦ 1 %]
Load life 85 °C, 0.25 W, 1000 h [ΔR/R ≦ 2 %] [S.S. ≦ 1 %]
Low temp. operation −55 °C, 2 h [ΔR/R ≦ 2 %] [S.S. ≦ 2 %]
High temp. exposure 120 °C, 250 h [ΔR/R ≦ 2 %] [S.S. ≦ 2 %]
Immersion seal 85 °C, 60 s No leaks (No continuous bubbles)
Soldering heat Flow soldering :260 ± 3 °C, 5 ~ 6 s, two times maximum
Manual soldering : 380 ± 10 °C, 3 ~ 4 s
[ΔR/R ≦ 1 %]
Δ R/R:Change in total resistance  S.S. :Setting stability

MAXIMUM INPUT RATINGS

Nominal resistance values(Ω)Resistance codeMaximum input voltage(V)Maximum wiper current(mA)
10 100 1.00 100
20 200 2.00 100
50 500 3.53 70.7
100 101 5.00 50.0
200 201 7.07 35.3
500 501 11.1 22.3
1k 102 15.8 15.8
2k 202 22.3 11.1
5k 502 35.3 7.07
10k 103 50.0 5.00
20k 203 70.7 3.53
50k 503 111 2.23
100k 104 158 1.58
200k 204 200 1.00
500k 504 200 0.40
1M 105 200 0.20
2M 205 200 0.10
The products indicated by ※mark are manufactured upon receipt of order basis.

PART NUMBER DESIGNATION

RJ-5EP100 kΩ (104)

Series

Terminal pin

E: 
Sn (Lead-free)

Terminal shape (Adjust Pos.)※1

W: 
P: 
X:
Through hole (Top adjustment)
Through hole (Side adjustment)
Through hole (Side adjustment)

Resistance value (Resistance code)

  • ※1) 
    For the details on each product shape, refer to the following table and Outline Dimensions.
Nominal resistance values 10Ω*, 20Ω*, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ
When ordering, please be sure to include the above nominal resistance value at the end of the part number in the table list below. *10 Ω item, 20 Ω item are made to order.
For resistance code, please refer to the Maximum Input Ratings table in the previous section.

LIST OF PART NUMBERS

 
 

 

 
 
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.09.00) can be downloaded from the popup for each P/N in the table below. *Need to log in to download.
Part No.Adjustment
position
Shape of terminalQ'ty/
packaging
Material dataCAD
RJ-5EW Top adjustment Through hole 50 pcs./pack
RJ-5EX Side adjustment Through hole 50 pcs./pack
RJ-5EP Side adjustment Through hole 50 pcs./pack

OUTLINE DIMENSIONS

Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)

Environmental Data

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top