Trimmer potentiometer RJ-5
-
RJ-5
-
RJ-5
- ●To buy this product, please go to the following Online Web stores.
14 turns Cermet Trimmers
FeaturesFeatures
- Fine setting is possible
- Sealed construction
- Resin material is UL Recognized 94V-0 (Excluding adhesives)
- In this series, material data sheets ideal for REACH-SVHC
surveys etc. can be downloaded in chemSHERPA-AI format. - Download chemSHERPA-AI from the list of P/N below
Electrical Characteristics
| Power ratings | 0.25 W (85 °C) 0 W (120 °C) |
|---|---|
| Nominal resistance range | 10 Ω ~ 2 MΩ |
| Resistance tolerance | ± 10 % |
| Resistance law | Linear law（B） |
| Maximum input voltage | DC200 V or power rating, whichever is smaller |
| Maximum wiper current | 100 mA or power rating, whichever is smaller |
| Effective electrical turn | 11 turns |
| End resistance | 1 % or 2 Ω , whichever is greater |
| C.R.V. | 1 % or 3 Ω , whichever is greater |
| Operating temp. range | −55 ~ 120 °C |
| Temp. coefficient | ± 100 10-6/°C maximu10 Ω ~ 50 Ω : ± 250 10-6/°C maximum 100 Ω ~ 2 MΩ : ± 100 10-6/°C maximum |
| Insulation resistance | 1000 MΩ minimum (DC500 V) |
| Dielectric strength | AC600 V, 60 s |
| Net weight | Approx. 0.37 g |
Mechanical Characteristics
| Mechanical turn | 14 turns |
|---|---|
| Operating torque | 20 mN·m {204 gf·cm} maximum |
| Mechanical stop | Clutch action |
| Rotational life | 200 cycles 10 Ω ~ 200 Ω [ΔR/R ≦ ± (0.5 Ω +3 %)] 500 Ω ~ 2 MΩ [ΔR/R ≦ ± (0.5 Ω +2 %)] |
| Terminal strength | 10 N {1.02 kgf} minimum（Tensile strength) |
| Thrust to shaft | 5 N {0.51 kgf} minimum |
| Solderability | 245 ± 3 °C, 2 ~ 3 s |
{ }：Reference only
Environmental Characteristics
| Test item | Test conditions | Specifications |
|---|---|---|
| Shock | 981 m/s2, 6 ms 6 directions for 3 times each | [ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
| Thermal shock | −65 ~ 125 °C(0.5 h), 5 cycles | [ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
| Humidity | −10 ~ 65 °C ( Relative humidity 80 ~ 98 %),10 cycles, 240 h | [ΔR/R ≦ 1 %] |
| Vibration | Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each |
[ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
| Load life | 85 °C, 0.25 W, 1000 h | [ΔR/R ≦ 2 %] [S.S. ≦ 1 %] |
| Low temp. operation | −55 °C, 2 h | [ΔR/R ≦ 2 %] [S.S. ≦ 2 %] |
| High temp. exposure | 120 °C, 250 h | [ΔR/R ≦ 2 %] [S.S. ≦ 2 %] |
| Immersion seal | 85 °C, 60 s | No leaks (No continuous bubbles) |
| Soldering heat | Flow soldering :260 ± 3 °C, 5 ~ 6 s, two times maximum Manual soldering : 380 ± 10 °C, 3 ~ 4 s |
[ΔR/R ≦ 1 %] |
Maximum Input Ratings
| Nominal resistance values(Ω) | Resistance code | Maximum input voltage(V) | Maximum wiper current(mA) |
|---|---|---|---|
| 10※ | 100 | 1.00 | 100 |
| 20※ | 200 | 2.00 | 100 |
| 50 | 500 | 3.53 | 70.7 |
| 100 | 101 | 5.00 | 50.0 |
| 200 | 201 | 7.07 | 35.3 |
| 500 | 501 | 11.1 | 22.3 |
| 1k | 102 | 15.8 | 15.8 |
| 2k | 202 | 22.3 | 11.1 |
| 5k | 502 | 35.3 | 7.07 |
| 10k | 103 | 50.0 | 5.00 |
| 20k | 203 | 70.7 | 3.53 |
| 50k | 503 | 111 | 2.23 |
| 100k | 104 | 158 | 1.58 |
| 200k | 204 | 200 | 1.00 |
| 500k | 504 | 200 | 0.40 |
| 1M | 105 | 200 | 0.20 |
| 2M | 205 | 200 | 0.10 |
The products indicated by ※mark are manufactured upon receipt of order basis.
Part Number Designation
| RJ-5 | E | P | 100 kΩ (104) |
|---|---|---|---|
|
Series |
Terminal pin E:
Sn (Lead-free)
|
Terminal shape (Adjust Pos.)※1 W:
P: X: Through hole (Top adjustment)
Through hole (Side adjustment) Through hole (Side adjustment) |
Resistance value (Resistance code) |
-
※1)For the details on each product shape, refer to the following table and Outline Dimensions.
| Nominal resistance values | 10Ω*, 20Ω*, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ |
|---|
When ordering, please be sure to include the above nominal resistance value at the end of the part number in the table list below. *10 Ω item, 20 Ω item are made to order.
For resistance code, please refer to the Maximum Input Ratings table in the previous section.
List of Part Numbers
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.09.00) can be downloaded from the popup for each P/N in the table below. *Need to log in to download.
| Part No. | Adjustment position | Shape of terminal | Q'ty/ packaging | Material data | CAD |
|---|---|---|---|---|---|
| RJ-5EW | Top adjustment | Through hole | 50 pcs./pack | ||
| RJ-5EX | Side adjustment | Through hole | 50 pcs./pack | ||
| RJ-5EP | Side adjustment | Through hole | 50 pcs./pack |
Outline Dimensions
Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
