Illuminated pushbutton switch TP/TPL｜NIDEC COMPONENTS EUROPE GmbH

Illuminated pushbutton switch TP/TPL

TP/TPL

TP/TPL

Kontaktiere uns

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Ultra-Miniature Pushbutton Switches

FeaturesFeatures

Long Travel DPDT ultra-miniature switch with long travel (latch position: 1 mm, total travel: 1.5 mm).
High Contact Reliability Clip type contact mechanism ensures high reliability
PC Board Mount Terminal pitch is in inches (multiples of 2.54 mm) for all models. The unique terminal shape prevents the terminal pins from coming loose from the PC board during dip soldering
Epoxy Sealed Terminals Epoxy sealed terminals prevent ingress of flux
Wide Variety of Accessories Wide selection of accessories including color buttons, mounting frames, and LED illuminations are available
Unified Mounting Height The mounting height of the TP/TPL series is the same as the LTR/LTM series which makes it convenient to design into the same panel.

Specifications

Rating	Silver plated contacts: 0.1 A 30 VDC max. Gold plated contacts: 30 VDC 0.1 A Max. 1 μA min.
Initial contact resistance	Silver plated contacts: 50 mΩ max. (1.5 mA 200 μVAC) Gold plated contacts: 100 mΩ max. (1.5 mA 200 μVAC)
Dielectric strength	500 VAC 1 minute
Insulation resistance	100 MΩ　min. (500 VDC)
Electrical life	10,000 operations
Operating force	TP: 1.47 ±0.98 N (Momentaly) TPL: 2.45 ±0.98 N (Push to lock)
Operating temperature range	⁻10 ~ +70 ℃
Storage temperature range	ｰ25 ~ +85 ℃

Part Number Designation

T	P	L	1-	01	G-	L2
Series	Timing of switching P: Non-shorting	Operation type Blank: Momentary L: Push to lock	Structure	Registration No.	Contact plating Blank: Silver plated G: Gold plated	LED color Blank: Without LED L2: Red L5: Green L8: Yellow

G-

Series

Timing of switching

P: Non-shorting

Operation type

Blank: Momentary

L: Push to lock

Structure

Registration No.

Contact plating

Blank: Silver plated

G: Gold plated

LED color

Blank: Without LED

L2: Red

L5: Green

L8: Yellow

List of Part Numbers

T	P	L	1-	01	G-	L2
Series code	Timing of switching P:Non-shorting	Operation type none：Momentary L:Push to lock	Structure	Registration No.	Contact plating None:Silver G:Gold	LED color None:Without LED L2:Red L5:Green L8:Yellow

G-

Series code

Timing of switching

P:Non-shorting

Operation type

none：Momentary

L:Push to lock

Structure

Registration No.

Contact plating

None:Silver

G:Gold

LED color

None:Without LED

L2:Red

L5:Green

L8:Yellow

List of part numbers

Part No.	Contact plating	LED color	Operation type	CAD
TP1-01	Silver	―	Momentary	3D CAD（Any Model）
TPL1-01	Silver	―	Push to lock	3D CAD（Any Model）
TP2-01	Silver	―	Momentary	3D CAD（Any Model）
TPL2-01	Silver	―	Push to lock	3D CAD（Any Model）
★TP1-01G	Gold plated	―	Momentary	3D CAD（Any Model）
★TP2-01G	Gold plated	―	Momentary	3D CAD（Any Model）
★TPL2-01G	Gold plated	―	Push to lock	3D CAD（Any Model）
☆TP2-01-L2	Silver	Red	Momentary	3D CAD（Any Model）
TP2-01-L5	Silver	Green	Momentary	3D CAD（Any Model）
☆TP2-01-L8	Silver	Yellow	Momentary	3D CAD（Any Model）
★TP2-01G-L2	Gold plated	Red	Momentary	3D CAD（Any Model）
★TP2-01G-L5	Gold plated	Green	Momentary	3D CAD（Any Model）
★TP2-01G-L8	Gold plated	Yellow	Momentary	3D CAD（Any Model）
☆TPL2-01-L2	Silver	Red	Push to lock	3D CAD（Any Model）
TPL2-01-L5	Silver	Green	Push to lock	3D CAD（Any Model）
☆TPL2-01-L8	Silver	Yellow	Push to lock	3D CAD（Any Model）
★TPL2-01G-L2	Gold plated	Red	Push to lock	3D CAD（Any Model）
★TPL2-01G-L5	Gold plated	Green	Push to lock	3D CAD（Any Model）
★TPL2-01G-L8	Gold plated	Yellow	Push to lock	3D CAD（Any Model）

☆: Semi-standard products /
★: Made to order products

Optional Accessories

※

A part number indicated with a gray-back in the list below was discontinued with an order deadline of Dec. 20, 2023.

1. Color buttons

Size	Illuminated type or Non	Color	Part No.
□7.5 ㎜	Without LED	Black	140007480234
		Gray	140007480235
		White	140007480236
		Ivory	140007480237
		Red	140007480231
	With LED	Clear	140007480466
		Red clear	140007480238
		Green clear	140007480239
		Yellow clear	140007480240
Φ7.5 ㎜	Without LED	Black	140007480272
		Gray	140007480273
		White	140007480274
		Ivory	140007480275
		Red	140007480269
	With LED	Clear	140007480467
		Red clear	140007480276
		Green clear	140007480277
		Yellow clear	140007480278
□10 ㎜	Without LED	Black	140007480244
		Gray	140007480245
		White	140007480246
		Ivory	140007480247
		Red	140007480241
Φ10 ㎜	Without LED	Black	140007480282
		Gray	140007480283
		White	140007480284
		Ivory	140007480285
		Red	140007480279

2. Dot illuminated buttons

※

Part numbers indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.

Size	LED color	Button color	Part No.
□10 ㎜	Clear	Black	140007480468
		Gray	140007480469
		White	140007480470
		Ivory	140007480471
		Red	140007480472
	Red clear	Black	140007480251
		Gray	140007480252
		White	140007480253
		Red	140007480248
	Green clear	Black	140007480258
		Gray	140007480259
		Ivory	140007480261
	Yellow clear	Black	140007480265
		Gray	140007480266
		White	140007480267
		Ivory	140007480268

3. Mounting frames

※

Part numbers indicated with a gray-back in the list below were discontinued with an order deadline of Dec. 20, 2023.

Applicable size	Color	Part No.
for □7.5 ㎜	Black	140000340191
	Gray	140000340192
	White	140000340193
	Ivory	140000340194
for Φ7.5 ㎜	Black	140000340195
	Gray	140000340196
	White	140000340197
	Ivory	140000340198
for □10 ㎜用	Black	140000340187
	Gray	140000340188
	White	140000340189
	Ivory	140000340190
for Φ10 ㎜用	Black	140000340199
	Gray	140000340200
	White	140000340201
	Ivory	140000340202

※

The mounting frame can be used for both illuminated and non-illuminated types depending on the applicable size.

Handling Precautions

◆Soldering Specifications

Manual Soldering
Device: Soldering iron
①380°C, Max.; 3 second, Max.
Wave Soldering/ Device: Jet wave type or dip type
①245°C; 3 seconds, Max.
Pre-heating should be done at temperatures below 80°C to 120°C and within 120 seconds.
For TPL type, soldering should be done with the lock released.
Do not dip solder the switches with color buttons or mounting frames attached. Soldering heat may deform the accessorie or cause ingress of flux.

◆Flux Cleaning

Solvents : Fluorine or Alcohl type
The TP/TPL series are not washable. To wash the PC board,clean the soldering surface of the PC board with a brush so　that the switch is not exposed to the cleaning solution.
After soldering, wait until the temperature of the terminals　cool down to 90℃ or below or until the parts are exposed　to room temperature for more than 5 min. before washing.

◆Switch Operation

Operating force should be 9.8 N or less.
Do not operate the switch right after soldering.
Do not solder the switch with the actuator pressed down.

Packaging Specification

(Unit:mm)

Unterlagen

Environmental Data

RoHS CoC

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Kontaktiere uns

Zur vorherigen Seite