Pressure transducer (ratio metric) P-7100｜NIDEC COMPONENTS EUROPE GmbH

Pressure transducer (ratio metric) P-7100

P-7100
Fitting: R1/8
P-7100
Fitting: M5 female

P-7100
Fitting: R1/8
P-7100
Fitting: M5 female

●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.: SALES CHANNELClick here to check our Distributors.

Ultra-miniature pressure sensors

Suitable for installing inside the narrow space of the equipment thanks to its small size and light weight
outline dimensions φ 17×18.7mm, Net weight: Approx 19 g (M5 type)
High reliability (SUS316L diaphragm, oil-filled) by using double diaphragm structure
Supply voltage and analog output is 5±0.5V and the 0.5 ~ 4.5V(ratiometric output)
High accuracy by using a digital compensation circuit employing the COB (chip on board) mounting
Variety pressure range: 0 ~ 100kPa, -100 ~ 100kPa, 0 ~ 1MPa, 0 ~ 133.3kPa abs

Standard specifications

Media	Corrosive gases/liquids compatible with SUS316L and SUS304
Operating temp.range	－20～70℃
Compensated temp. range	0～50℃
Operating humidity range	35～85％RH（No condensation）
Storage temp. range	－20～80℃（Atmospheric pressure, humidity 65 %RH maximum）
Insulation resistance	100MΩ minimum（500VDC）
Dielectric strength	500V AC 60 s（Leakage current 1mA maximum）
Operating voltage	5±0.5VDC
Current consumption	3mA Maximum
Sealed liquid	Silicone oil
Net weight	R1：Approx.22ｇ, M5：Approx.19ｇ

Analog output

Item/Model number	102G	103G	102R	132A
Output voltage※	0.5 ~ 4.5V
Output limit	16.5mV ~ 95% Vopr
Zero voltage※	0.5±0.04V		2.5±0.04V	0.5±0.1V
Span voltage※	4.0±0.04V			4.0±0.1V
Output current	1mA Maximum（Load resistance 5kΩ minimum）
Linearity / Hysteresis	±0.5 %F.S.
Thermal error (Reference temp.25°C)	Zero/Span:±0.05%F.S./°C			Zero/Span:±0.06%F.S./°C
Response time	Approx.2ms
Gravitational （From horizontal position to vertical position）	±0.3%F.S.	±0.05%F.S.	±0.3%F.S.	±0.3%F.S.

※Output voltage is proportional to the operating voltage.(ratiometric output)
The resolving power of the analog output is 11 Bits (about 0.002V/0.05%F.S).

Environment Characteristics

Test item	Test conditions	Permissible change
Vibration	10 ~ 500 Hz, 1.5 mm maximum/98.1m/s² 3 directions for 2 hours each	Analog output (Vzero, Vspan) ± 1 %F.S. maximum each after test
Shock	490m/s²,3 directions for 3 times each
Pressure cycling	0 ~ Rated pressure,　10⁶cycles
Moisture resistance	40℃　90～95%RH　240 hrs.

Model Number Designation

P-7100 -	102	G	R1
Series name	Rated pressure range 102G: 0～100kPa 103G: 0～ 1.0MPa 102R: -100～100kPa 132A: 0～133.3kPa abs	Pressure reference G：Gauge (Positive) R：Gauge (Compound) A：Absolute	Fitting R1: R1/8 M5: M5 Female

P-7100 -

102

Series name

Rated pressure range

102G: 0～100kPa
103G: 0～ 1.0MPa
102R: -100～100kPa
132A: 0～133.3kPa abs

Pressure reference

G：Gauge (Positive)
R：Gauge (Compound)
A：Absolute

Fitting

R1: R1/8
M5: M5 Female

List of model numbers

Model Number	Fitting	Pressure reference	Rated pressure	Maximum pressure	Break-down pressure	CAD
P-7100-102G-R1	R1/8	Gauge	0～100kPa	200kPa	300kPa	3D CAD（Any Model）
P-7100-102G-M5	M5 Female	Gauge	0～100kPa	200kPa	300kPa	3D CAD（Any Model）
P-7100-102R-R1	R1/8	Gauge	-100～100kPa	200kPa	300kPa	3D CAD（Any Model）
P-7100-102R-M5	M5 Female	Gauge	-100～100kPa	200kPa	300kPa	3D CAD（Any Model）
P-7100-103G-R1	R1/8	Gauge	0～1.0MPa	2.0MPa	3.0MPa	3D CAD（Any Model）
P-7100-103G-M5	M5 Female	Gauge	0～1.0MPa	2.0MPa	3.0MPa	3D CAD（Any Model）
P-7100-132A-R1	R1/8	Absolute	0～133.3kPa abs	200kPa abs	300kPa abs	3D CAD（Any Model）
P-7100-132A-M5	M5 Female	Absolute	0～133.3kPa abs	200kPa abs	300kPa abs	3D CAD（Any Model）