Pressure switch PS6｜NIDEC COMPONENTS EUROPE GmbH

Pressure switch PS6

●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.: SALES CHANNELClick here to check our Distributors.

Pressure switches with gauge PS6

Solidstate pressure switch with no mechanical moving parts
2 types of pressure ports are available
Open collector output of either NPN or PNP is available
Analog output type available

General specifications

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 VDC.

Item	102V	102G	103G
Pressure reference	Gauge
Rated pressure range	0 ~ −100kPa	0 ~ 100kPa	0 ~ 1000kPa
Maximum pressure	200kPa	200kPa	1500kPa
Break-down pressure	500kPa	500kPa	2000kPa
Operating temp. range	−10 ~ 60°C
Compensated temp. range	0 ~ 50°C
Operating humidity	35 ~ 85%RH（No condensation）
Storage temp.	−20 ~ 70°C（Atmospheric pressure, humidity 65 %RH maximum）
Pressure medium	Non-corrosive gases
Insulation resistance	100 MΩ min.(500 VDC)
Dielectric strength	500 V AC, 60 s（Leakage current 1 mA maximum）
Pressure port	R 1/8（With M5 Female screw）or M5 Female screw
Net weight	Approx. 50g（Including cable）
Supply voltage	12 ~ 24 V ± 10 %（Including ripple percentage）
Consumption current	35mA max.

Display

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 VDC.

Item	102V	102G	103G
Display element	2-digit LED
Rated display range	−0 ~ −99 kPa	0 ~ 99 kPa	.0 ~ .99 MPa
Display accuracy　0~50℃ (Reference temp. 25 °C)	± 3 %F.S. ± 2counts
Resolution	1 count

Switch output

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 VDC.

No. of outputs	1 or 2
Output interface	Open collector output (NPN or PNP)
Setting method	Adjustable by VR ※1
Adjustable range	0 ~ 100 of rated pressure　 ※2
Display	Red LED ON (W type only : SW1 Red, SW2 Green)
Accuracy 0~ 50℃ (Reference temp. 25 °C）	± 3 %F.S.
Switch hysteresis	Approx. 0 ~ 15 % of the set value (W type only 2 % F.S. maximum）
Switching capacity	30 V 80 mA maximum
Residual voltage	0.8 V maximum(NPN), 1.2 V maximum(PNP)
Response	Approx. 2ms

※ 1：Please set adjusting torque at 30 mN·m maximum.
※ 2：The actual setting range adjustable by VR has a little overrunning margin

Analog output

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 12 VDC.

Output voltage	1 ~ 5V
Zero voltage	1 ± 0.1V
Span voltage	4 ± 0.1V
Output current	1mA maximum（Load resistance 5 kΩ minmum)

ENVIRONMENTAL CHARACTERISTICS

Test item	Test conditions	Permissible change
Vibration	10 ~ 500 Hz, 1.5 mm maximum/98.1 m/s² , 3 directions for 2 hours each	Pressure indication, switch operating pressure and analog output variation : ± 2 %F.S., maximum each after test
Shock	196 m/s² , 3 directions for 3 times each
Moisture resistance	40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling	0 ~ Rated pressure, 10⁶ cycles

CIRCUIT DIAGRAMS

SWITCHING OPERATION

OUTLINE DIMENTIONS

MODEL NUMBER DESIGNATION

PS6-	102	V-	N	A	R
Series name	Rated pressure range 102：100 kPa 103：1000 kPa	Pressure reference G：Gauge V：Gauge (Vacuum)	Switch output interface N：NPN open collector P：PNP open collector	Output　 A：1 SW output and adjustable hysteresis + Analog output W：2 SW outputs	Pressure port R：R1/8 male screw with M5 female screw M：M5 female screw

PS6-

102

V-

Series name

Rated pressure range

102：100 kPa

103：1000 kPa

Pressure reference

G：Gauge

V：Gauge (Vacuum)

Switch output interface

N：NPN open collector

P：PNP open collector

Output　

A：1 SW output and adjustable hysteresis + Analog output

W：2 SW outputs

Pressure port

R：R1/8 male screw with M5 female screw

M：M5 female screw

LIST OF MODEL NUMBERS

Model number	Rated pressure	Pressure port	Output	Switch output interface	CAD
PS6-102V-NAR	0~−100 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-102V-PAR	0~−100 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-102V-NWR	0~−100 kPa	R1/8 male screw with M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-102V-PWR	0~−100 kPa	R1/8 male screw with M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）
PS6-102V-NAM	0~−100 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-102V-PAM	0~−100 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-102V-NWM	0~−100 kPa	M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-102V-PWM	0~−100 kPa	M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）
PS6-102G-NAR	0~100 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-102G-PAR	0~100 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-102G-NWR	0~100 kPa	R1/8 male screw with M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-102G-PWR	0~100 kPa	R1/8 male screw with M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）
PS6-102G-NAM	0~100 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-102G-PAM	0~100 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-102G-NWM	0~100 kPa	M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-102G-PWM	0~100 kPa	M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）
PS6-103G-NAR	0~1000 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-103G-PAR	0~1000 kPa	R1/8 male screw with M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-103G-NWR	0~1000 kPa	R1/8 male screw with M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-103G-PWR	0~1000 kPa	R1/8 male screw with M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）
PS6-103G-NAM	0~1000 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	NPN	3D CAD（Any Model）
PS6-103G-PAM	0~1000 kPa	M5 female screw	1 SW output and adjustable hysteresis + Analog output	PNP	3D CAD（Any Model）
PS6-103G-NWM	0~1000 kPa	M5 female screw	2 SW outputs	NPN	3D CAD（Any Model）
PS6-103G-PWM	0~1000 kPa	M5 female screw	2 SW outputs	PNP	3D CAD（Any Model）

Documents

●The above contents and descriptions are subject to change without notice.

Return previous page