Pushbutton switch FP
- ●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
Ultra-Miniature Pushbutton Switches
- Ultra-miniature pushbutton switch for high density mounting.
- Washable.
- Terminal pin pitch: 2.54 mm.
- Independent detent mechanism ensures light operational feel.
- Clip contact mechanism for long-term contact reliability.
- Gold-plated contacts.
Specification
| Rating | Max.:0.4VA(28VDC max.） Min.:1μA 20mVDC |
|---|---|
| Initial contact resistance | 100mΩmax.(1.5mA 200μVAC） |
| Dielecteic strength | 250V AC 1 minute |
| Insulation resistance | 500MΩ min.(250VDC） |
| Electrical life | 10,000 operations at max.rating, 30,000 operations at min.rating, |
| Mechanical life | 30,000 cycles |
| Operating force | 1.47±0.98N |
| Operating temperature range | －40～＋85℃ |
| Setmorpaegrea ture range | －40～＋85℃ |
Part number designation
| F | P | 2 | F - | 2 | M | Z |
|---|---|---|---|---|---|---|
|
Series code |
Actuator shape P:Pushbutton |
Number of poles 1: 1 pole |
Switching function F: ON －（ ON） |
Terminal style 2: P/C 4: Vertical mounting |
Actuator shape M: Standard |
List of part numbers
| Part number | Number of poles | Switching function | Switching function | CAD |
|---|---|---|---|---|
| FP1F－2M－Z | 1 pole | ON －（ ON） | P/C | |
| FP2F－2M－Z | 2 poles | ON －（ ON） | P/C | |
| FP1F－5M－Z | 1 pole | ON －（ ON） | Right angle | |
| FP2F－5M－Z | 2 poles | ON －（ ON） | Right angle | |
| FP1F－4M－Z | 1 pole | ON －（ ON） | Vertical mounting | |
| FP2F－4M－Z | 2 poles | ON －（ ON） | Vertical mounting |
Soldering Specifications
- Manual Soldering
Device：Soldering iron
380°C, Max.; 3 seconds, Max. - Auto soldering
Device：Jet wave type or dip type
275°C, Max.; 6 seconds, Max.
・Pre-heating should be done at temperatures from 80 to 120°C and within 120 seconds. - When soldering two or more terminals to the common land, use solder resist to solder them independently.
Flux Cleaning
- Solvents :Fluorine or Alcohol type
- Cleaning after soldering should be done after the PC board is exposed to room temperature (30℃ or below) for 1 to 2 hours.
- Do not use ultrasonic cleaning.
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
Products
