Pressure transducer with amp. PA-848
- ●To buy this product, please go to the following Online Web stores.
Strong structure with IP67 degree of protection
- Pressure sensors with IP67 degree of protection for outside-house applicants.
- Operation temperature up to 100 °C~ for pressure diaphragm.
- Voltage Output of 1 ~ 5 V DC with built-in amplifier (PA- 840), Current output of 4 ~ 20 mA DC (PA-848).
- High reliability (SUS 316 L diaphragm, oil-filled) by using double diaphragm structure.
- The most miniaturized terminal-assembly-type pressure sensor for outside-house applicants.
Model Number Designation
| PA-848 - | 102 | R - | R2 | |
|---|---|---|---|---|
|
Series name PA-848：Output Current（1-5V） |
Rated pressure range 102R ：-0.1～0.1MPa |
Pressure reference G ：Gauge |
Fitting R2：R 1/4 |
|
List of model numbers
| Model numbers | Rated pressure | Maximum pressure | Break-down pressure | Pressure reference | Fitting | CAD |
|---|---|---|---|---|---|---|
| PA-848-102R-R2 | -0.1～0.1MPa | 0.2MPa | 0.3MPa | Gauge（Compound） | R 1/4 | |
| PA-848-102R-G2 | -0.1～0.1MPa | 0.2MPa | 0.3MPa | Gauge（Compound） | G 1/4 | |
| PA-848-352R-R2 | -0.1～0.35MPa | 0.7MPa | 1.05MPa | Gauge（Compound） | R 1/4 | |
| PA-848-352R-G2 | -0.1～0.35MPa | 0.7MPa | 1.05MPa | Gauge（Compound） | G 1/4 | |
| PA-848-103G-R2 | 0～1.0MPa | 2MPa | 3MPa | Gauge | R 1/4 | |
| PA-848-103G-G2 | 0～1.0MPa | 2MPa | 3MPa | Gauge | G 1/4 | |
| PA-848-353G-R2 | 0～3.5MPa | 4MPa | 4.5MPa | Gauge | R 1/4 | |
| PA-848-353G-G2 | 0～3.5MPa | 4MPa | 4.5MPa | Gauge | G 1/4 | |
| PA-848-102A-R2 | 0～0.1MPa abs. | 0.2MPa abs. | 0.3MPa abs. | Absolute | R 1/4 | |
| PA-848-102A-G2 | 0～0.1MPa abs. | 0.2MPa abs. | 0.3MPa abs. | Absolute | G 1/4 |
Standard specifications
| Operating temp. range | Ta (No freezing) : -20 ~ 80 °C / Pressure port : -20 ~ 100 °C |
|---|---|
| Operating humidity | 35～85%RH (No condensation) |
| Storage temp. | -20～80℃ |
| Compensated temp. range | 0 ~ 50℃ |
| Pressure medium | Gas and liquid which does not corrode SUS 316L and Gas and liquid which does not corrode O-ring (Fluoro rubber) G2 Fitting |
| Pressure port | R 1/4、G 1/4 |
| Net weight | Approx. 250g |
| Protection grade | IP67 |
| Operating voltage | 21.6 ~ 26.4V DC（including ripple） |
Analog output
| Pressure range | 102Ｒ | 352Ｒ | 103Ｇ | 353Ｇ | 102Ａ |
|---|---|---|---|---|---|
| Output current | 4～20ｍA | ||||
| Zero current | 12±0.2ｍA | 7.56±0.2ｍA | 4±0.2ｍA | 4±0.2ｍA | 4±0.2ｍA |
| Span current | 16±0.4mA | ||||
| Linearity/Hysteresis | ±0.5％ FS | ||||
| Thermal error | ZERO/ SPAN: ±0.06％ FS/℃ | ||||
| Load resistance | 500Ω maximum | ||||
| Response | Approx. 2ms | ||||
| Gravitational effect (From vertical position to horizontal position) |
± 0.3%F.S. | ± 0.1%F.S. | ± 0.05%F.S. | ± 0.3%F.S. | |
Environment Characteristics
| Test item | Test conditions (At 25 ± 5 °C) | Permissible change |
|---|---|---|
| Vibration | 10 ~ 150 Hz, 1.5 mm maximum/98.1m/s2 ,3 directions for 2 hours each | Zero current, Span current: ± 2 %F.S. maximum each |
| Shock | 490m/s2, 3 directions for 3 times each | |
| Pressure cycling | 0～Pr 106 cycles | |
| Moisture resistance | 40℃ 90～95％RH, 240 hrs. |
Important Handling Precautions
- Never insert any foreign matters except specified pressure media into the pressure port, as this may alter the performance characteristics or damage the diaphragm, and cause malfunctions.
- Tighten wiring opening with the supplied cable gland for avoiding water intrusion.
- The cable gland and/or lid may get loose in certain usage environments and the sealing level may lower as a result. So please use a locking nut or tighten regularly.
- Atmospheric pressure is released through wiring cable.(Copal recommends a cable with built-in atmospheric-pressure-releasing tube)
- Cable wiring should be conducted in the state of power off. Shorting the output terminal and power terminal will damage the internal circuit.Please be careful not to wire incorrectly.
Documents
- ●The above contents and descriptions are subject to change without notice.
