Toggle switch ATE4/ATLE4｜NIDEC COMPONENTS, Inc.

Toggle switch ATE4/ATLE4

ATE4/ATLE4

ATE4/ATLE4

●To buy this product, please go to the following Online Web stores.

Subminiature Toggle Switch With Locking Lever

FeaturesFeatures

Twin-contact clip mechanism for high reliability.
Process sealed structure.

Specifications

Rating	Max.：50mA 60VAC/DC Min.：1μA 20mVAC/DCA UL：48VAC/DC 50mA:AC/DC20mV 1μA
Initial contact resistance	100mΩ max.(1.5mA 200μVAC)
Dielectric strength	500VAC 1 minute
Insulation resistance	500MΩ min. (500VDC)
Electrical life	10,000 cycles at max. rating
Operating temperature range	-20℃～＋85℃
Storage temperature range	-40℃～＋85℃

Part Number Designation

A	TLE	4	2	D-	2	M	3-	Z
Series	Actuator type TE: Standard TLE: Locking lever	Type of box 4: 4 poles box Blank: Low profile	No. of poles 2: 2 poles 4: 4 poles	SW function D: On-On E: On-Off-On N: On-On	Terminals 2: PC 5: R/A 0.2" pitch 6: R/A 0.3" pitch	Actuator shape M: Standard	Bracket 3: Without 4: With

TLE

D-

Series

Actuator type

TE: Standard

TLE: Locking lever

Type of box

4: 4 poles box

Blank: Low profile

No. of poles

2: 2 poles

4: 4 poles

SW function

D: On-On

E: On-Off-On

N: On-On

Terminals

2: PC

R/A 0.2" pitch

R/A 0.3" pitch

Actuator shape

M: Standard

Bracket

3: Without

4: With

Actuator type

List of Part Numbers

Part No.	Type of box	Terminals	SW function	Bracket	Actuator shape	CAD
Part No.：ATE44E-2M3-Z^☆	4 poles box	PC straight	ON-OFF-ON	Without	Standard	3D CAD（Any Model）
Part No.：ATE44D-2M4-Z^☆	4 poles box	PC straight	ON-ON	With	Standard	3D CAD（Any Model）
Part No.：ATE42D-6M3-Z^★	4 poles box	R/A 0.3" pitch	ON-ON	Without	Standard	3D CAD（Any Model）
Part No.：ATE44D-6M3-Z^★	4 poles box	R/A 0.3" pitch	ON-ON	Without	Standard	3D CAD（Any Model）
Part No.：ATLE42D-2M3-Z^★	4 poles box	PC straight	ON-ON	Without	Locking lever	3D CAD（Any Model）
Part No.：ATLE42D-2M4-Z^☆	4 poles box	PC straight	ON-ON	With	Locking lever	3D CAD（Any Model）
Part No.：ATLE42E-2M4-Z^☆	4 poles box	PC straight	ON-OFF-ON	With	Locking lever	3D CAD（Any Model）
Part No.：ATLE44D-6M3-Z^★	4 poles box	R/A 0.3" pitch	ON-ON	Without	Locking lever	3D CAD（Any Model）
Part No.：ATLE44E-6M3-Z^★	4 poles box	R/A 0.3" pitch	ON-OFF-ON	Without	Locking lever	3D CAD（Any Model）

☆: Semi-standard products /
★: Made to order products

Optional Accessories

Color Cap	Part No.	Color	Outline dimensions
For locking lever type (ATLE)	140000470225 (standard accessory)	Silver

A silver cap listed above is attached as standard with the locking lever type when you purchase the switch.

Outline Dimensions

(Unit:mm)

PC Hole Layouts

Standard Accessories

For Locking Lever Type

A Silver cap is attached to the switch. Red, Blue, and Black caps are also available (sold separately).

Soldering Specifications

Manual Soldering
Device ： Soldering iron
380℃, Max.; 3 seconds, Max.
Auto Soldering
Device ： Jet wave type or dip type
275℃, Max.; 6 seconds, Max.　
Pre-heating should be done at temperatures ranging from 80℃　to 120℃ and within 120 seconds

Flux Cleaning

Solvent : Fluorine or Alcohol type.
Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for five minutes or longer at room temperature.

Mounting of Switch

Do not bend the terminal pins before mounting the switch on the PC board.
After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
Do not apply load exceeding 12.7 N to the actuator.