Rotary selector switch CS-7｜NIDEC COMPONENTS EUROPE GmbH

Rotary selector switch CS-7

CS-7

CS-7

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

7mm square for easy position setting

RoHS compliant
Easy position setting with wide switching angle
High digit visibility
Washable

STANDARD SPECIFICATIONS

Circuit type	1 pole 4 contacts
Operating temperature range	− 40 ~ 85 °C
Storage temperature range	− 40 ~ 85 °C
Sealing	Washable by "O"ring
Net weight	Approx. 0.38 g

ELECTRICAL CHARACTERISTICS

Contact rating	Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA
Contact resistance	100 mΩ maximum
Insulation resistance	1000 MΩ (DC100 V) minimum
Dielectric strength	AC250 V, 60 s

MECHANICAL CHARACTERISTICS

Stepping angle	90°
No. of positions	4
Adjustment torque	3~20 mN·m {31~204gf·cm}
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Reflow：Peak temperature 250°C to 255 °C Please refer to the profile below Manual soldering： 350 ± 10 °C, 3 ~ 4 s
Shear (adhesion)	5 N {0.51 kgf} 10 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength	5 N {0.51 kgf} 10s

ENVIRONMENTAL CHARACTERISTICS

Load life	10000 steps minimum, DC5 V, 100 mA
Vibration	Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each
Shock	490 m/s2, 11 ms 6 directions for 3 times each
Humidity (Steady state)	40 °C, Relative humidity 90 ~ 95 %,240 h
High temperature exposure	85 °C, 96 h
Low temperature exposure	−40 °C, 96 h
Thermal shock	−40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles

PART NUMBER DESIGNATION

CS-７―	１	４	T	B
Series name	No. of poles 1: 1pole	No. of contacts 4：4 contacts	Form of packaging　 T：Taping (Reel) M：Magazine	Shape of terminal B：Gull wing

CS-７―

１

４

Series name

No. of poles

1: 1pole

No. of contacts

4：4 contacts　

Form of packaging　

T：Taping (Reel)

M：Magazine

Shape of terminal

B：Gull wing

LIST OF PART NUMBERS

PART NUMBERS	Circuit type	Setting position	Shape of terminal	Form of packaging	Pieces in package	CAD
CS-7-14TB	1 pole 4 contacts	Top setting	Gull wing	Taping	500 pcs./reel	3D CAD（Any Model）
CS-7-14MB	1 pole 4 contacts	Top setting	Gull wing	Magazine	50 pcs./stick	3D CAD（Any Model）

OUTLINE DIMENSIONS

Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)

RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS

(Unit: mm)

PACKAGING SPECIFICATIONS

〈Taping packaging specifications〉
● Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500 pcs., etc.
● Taping version is boxed with one reel (500 pcs.).
● Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the diagrams below:

(Unit:mm)