Rotary selector switch CS-7
-
●To buy this product, please go to the following Online Web stores.
7 mm square surface mount rotary switch for easy position setting
FeaturesFeatures
- Easy position setting with wide switching angle
- High digit visibility
- Protection against dust and washable after soldering
Standard Specifications
| Circuit type | 1 pole 4 contacts |
|---|---|
| Operating temperature range | − 40 ~ 85 °C |
| Storage temperature range | − 40 ~ 85 °C |
| Sealing | Washable by "O"ring |
| Net weight | Approx. 0.38 g |
Electrical Characteristics
| Contact rating | Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA |
|---|---|
| Contact resistance | 100 mΩ maximum |
| Insulation resistance | 1000 MΩ (DC100 V) minimum |
| Dielectric strength | AC250 V, 60 s |
Mechanical Characteristics
| Stepping angle | 90° |
|---|---|
| No. of positions | 4 |
| Adjustment torque | 3~20 mN·m {31~204gf·cm} |
| Solderability | 245 ± 3 °C, 2 ~ 3 s |
| Soldering heat | Reflow：Peak temperature 250°C to 255 °C Please refer to the profile below Manual soldering： 350 ± 10 °C, 3 ~ 4 s |
| Shear (adhesion) | 5 N {0.51 kgf} 10 s |
| Substrate bending | Width 90 mm, bend 3 mm, 5 s, 1 time |
| Pull-off strength | 5 N {0.51 kgf} 10s |
Environmental Characteristics
| Load life | 10000 steps minimum, DC5 V, 100 mA |
|---|---|
| Vibration | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each |
| Shock | 490 m/s2, 11 ms 6 directions for 3 times each |
| Humidity (Steady state) | 40 °C, Relative humidity 90 ~ 95 %,240 h |
| High temperature exposure | 85 °C, 96 h |
| Low temperature exposure | −40 °C, 96 h |
| Thermal shock | −40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles |
Part Number Designation
| CS-７- | １ | ４ | T | B |
|---|---|---|---|---|
|
Series name |
No. of poles 1: 1pole |
No. of contacts 4：4 contacts |
Form of packaging T：Taping (Reel) M：Magazine |
Shape of terminal B：Gull wing |
List of Part Numbers
| PART NUMBERS | Circuit type | Setting position | Shape of terminal | Form of packaging | Pieces in package | CAD |
|---|---|---|---|---|---|---|
| CS-7-14TB | 1 pole 4 contacts | Top setting | Gull wing | Taping | 500 pcs./reel | |
| CS-7-14MB | 1 pole 4 contacts | Top setting | Gull wing | Magazine | 50 pcs./stick |
Outline Dimensions
Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)
Recommended P.C.B. Pad Outline Dimensions
(Unit: mm)
Packaging specifications
〈Taping packaging specifications〉
Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500 pcs., etc.
Taping version is boxed with one reel (500 pcs.).
Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the diagrams below:
(Unit:mm)
-
● Embossed tape dimensions
-
● Reel dimensions
(Conforms to JIS C 0806-3 , In accordance with EIAJ ET-7200A)
〈Magazine packaging specifications〉
Please order the multiple numbers of the specific packing quantities.
Pieces in package : 50 pcs./stick.
(Unit:mm)
● Magazine dimensions
magazine length : 390 ± 3 mm long
Documents
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
