Pressure gauge PG-200｜NIDEC COMPONENTS CORPORATION

Pressure gauge PG-200

PG-200

PG-200

●To buy this product, please go to the following Online Web stores.

Pressure gauge PG-200

Excellent stability
A semiconductor chip is used as pressure a sensing element. State of the art circuit technology guarantees excellent temperature compensation.
Low power consumption
Approx. 9000 hours (one year) continuous operation by 3.6 V lithium battery is expected due to the adoption time sharing operation method.
Easy reading with a large LCD display
With pressure switches function
Two independent pressure setting points of HI and LO
With analog output (0 ~ 1 V)
Meets DIN sizes W72 × H72 × D40 mm
PG-200 is for non-corrosive gases.

STANDARD SPECIFICATIONS[Pa version]

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C, excitation voltage of 12 V DC and battery of 3.6 VDC.

● General specifications

Pressure reference		Gauge				Absolute
Model number (Pa unit display)		101GP	102GP	103GP	102VP	102AP
Model number (Pa unit display)		101GP	102GP	103GMP	102VP	102AP
Rated pressure range		10kPa	100kPa	1000kPa	-100kPa	100 kPa(abs)
Maximum pressure		20kPa	200kPa	1500kPa	200kPa	200 kPa(abs)
Break-dawn pressure		50kPa	500kPa	2000kPa	500kPa	500 kPa(abs)
Operating temp., range		0 ~ 50°C
Compensated temp. range		0 ~ 50°C
Operating humidity		35 ~ 85%RH（No condensation）
Storage temp.		− 20 ~ 70°C（Atmospheric pressure, humidity 65 %RH maximum）
Pressure medium		Non-corrosive gases
Pressure port	Panel type	M 5
Pressure port	Stand type	R 1/4(PT 1/4)
Net weight	Panel type	Approx. 130g
Net weight	Stand type	Approx. 330g
Power	Battery type	Lithium battery DC 3.6 V (ER6VM) Battery life 9000 h minimum
Power	External power	DC5〜10 V、DC10〜24 V (Selectable by electrical terminals only in case of stand type) Consumption current : 20 mA maximum

● Display

Pressure reference		Gauge				Absolute
Model number (Pa unit display)		101GP	102GP	103GP	102VP	102AP
Model number (Pa unit display)		101GP	102GP	103GMP	102VP	102AP
Display cycle		Approx. 3 times/s
Display accuracy		± 0.5 %F.S. ± 2 counts (at 25 ± 5 °C) maximum
Thermal error	ZERO	± 0.1 % F.S./°C maximum	± 0.05 % F.S./°C ± 2 counts maximum			± 0.1 % F.S./°C ± 2 counts maximum
Thermal error	SPAN	± 0.05 % Reading/°C ± 2 counts
Resolution		1 count

● Switch

Pressure reference	Gauge				Absolute
Model number (Pa unit display)	101GP	102GP	103GP	102VP	102AP
Model number (Pa unit display)	101GP	102GP	103GMP	102VP	102AP
Resolution	1 count
No. of setting points	2 points of HI and LO (one point of HI only for the external power supply version)
Switching capacity	30 VDC、40 mA（NPN open collector）
Residual voltage	1.2 VDC（When current inflow is 40 mA）
Output conditions	Measured press ≧ LO set press. → LO output ON, Measured press. ≧ HI set press. → HI output ON.
Setting method	When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LO set pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can be made by VR watching the display
Pressure setting range (Pa unit display)	0.00~10.00kPa	00.0~100.0kPa	000~1000kPa	00.0~ − 100.0kPa	00.0~ 100.0kPa
Pressure setting range (Pa unit display)	0.00~10.00kPa	00.0~100.0kPa	.000~1.000 (MPa)	00.0~ − 100.0kPa	00.0~ 100.0kPa
Switch state indication	Indicated by an LCD display (HI or LO) when the switch output is ON.
Response	Approx. 100 ms
Switching hysteresis	4 counts maximum
Analog voltage output ※1	Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 °C), Load: 1 kΩ minimum
Additional function	Low battery indication (LO BAT)
Accessories (for panel type only)	Attachements : Half union (for a tube of φ 6 0.D.), and Barb fitting (for a tube of φ 4 I.D.), one piece each.(Panel type only)

※ 1 : Available only for external power type.

STANDARD SPECIFICATIONS[Non SI unit version]

Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C, excitation voltage of 12 V DC and battery of 3.6 VDC.

◆ General specifications

Pressure reference		Gauge				Absolute
Model number		101G	102G	103G	102VH	102AH
Rated pressure range kPa{kgf/cm2}		9.81 {1000 mmH2O}	98.1 {1}	981 {10}	-98.1 {-735 mmHg}	98.1 kPa abs {735 mmHg abs}
Maximum pressure kPa{kgf/cm2}		19.6 {2000 mmH2O}	196 {2}	1471 {15}	196 {1471 mmHg}	196 kPa abs {1471 mmHg abs}
Break-dawn pressure kPa{kgf/cm2}		49.0 {5000 mmH2O}	490 {5}	1961 {20}	490 {3678 mmHg}	490 kPa abs {3678 mmHg abs}
Operating temp., range		0~50°C
Compensated temp. range		0~50°C
Operating humidity		35~85%RH（No condensation）
Storage temp.		-20~70°C (Atmospheric pressure, humidity 65 %RH maximum）
Pressure medium		Non-corrosive gases
Pressure port	Panel type	M 5
Pressure port	Stand type	R 1/4(PT 1/4)
Net weight	Panel type	Approx. 130g
Net weight	Stand type	Approx. 330g
Power	Battery type	Lithium battery DC 3.6 V (ER6VM) Battery life 9000 h minimum
Power	External power	DC5~10 V、DC10~24 V (Selectable by electrical treminals only in case of stand type) Consumption current : 20 mA maximum

◆ Display

Pressure reference		Gauge				Absolute
Model number		101G	102G	103G	102VH	102AH
No. of digits		3 1/2
Display element		LCD
Rated display range		000~1000 mmH2O	.000~1.000 kgf/cm2	0.00~10.00 kgf/cm2	000~-735 ※ 2 mmHg	000~735 ※ 2 mmHg
Display cycle		Approx. 3 times/s
Display accuracy		± 0.5 %F.S. ± 2 counts (at 25 ± 5 °C) maximum
Thermal error	ZERO	± 0.1 % F.S./°Cmaximum	± 0.05 % F.S./°C ± 2 counts maximum			± 0.1 % F.S./°C ± 2 counts maximum
Thermal error	SPAN	± 0.05 % Reading/°C ± 2 counts
Resolution		1 count

◆ Switch

Pressure reference	Gauge				Absolute
Model number	101G	102G	103G	102VH	102AH
No. of setting points	2 points of HI and LO (one point of HI only for the external power supply version)
Switching capacity	30 V DC、40 mA（NPN open collector）
Residual voltage	1.2 V DC（When current inflow is 40 mA）
Output conditions	Measured press ≧ LO set press. → LO output ON, Measured press. ≧ HI set press. → HI output ON.
Setting method	When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LOset pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can be made by VR watching the display.
Pressure setting range	000~1000kPa	.000~1.000kPa	0.00~10.00kPa	000~ -735 ※ 3	000~735 ※ 3
Switch state indication	Indicated by an LCD display (HI or LO) when the switch output is ON.
Response	Approx. 100 ms
Switching hysteresis	4 counts maximum
Analog voltage output　※ 1	Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 °C), Load: 1 kΩ minimum
Additional function	Low battery indication (LO BAT)
Accessories (for panel type only)	Attachements : Half union (for a tube of φ 6 0.D.), and Barb fitting (for a tube of φ 4 I.D.), one piece each. (Panel type

※ 1：Available only for external power type.
※ 2 : Measurement can be made up to “- 760 mmHg” for 102VH and up to “760 mmHg” for 102AH (Accuracy not guaranteed beyond the rated pressure.).
※ 3 : Pressure setting can be made up to “– 760 mmHg” for 102VH and up to “760 mmHg” for 102AH (Accuracy not guaranteed beyond the rated pressure.).

MODEL NUMBER DESIGNATION

PG-200-	102	G P-	3 -	P
Series name	Rated pressure range 101:0~9.81 kPa {0~0.1 kgf/cm2} 0~10 kPa (Pa unit display） 102:0~98.1 kPa {0~1 kgf/cm2} 0~100 kPa (Pa unit display） 103:0~981 kPa {0~10 kgf/cm2} 0~1 MPa (Pa unit display）	Pressure reference G:Gauge VH:Gauge(Vacuum) AH:Absolute GP:Gauge Pa unit display GMP:Gauge(103 type only） Pa unit display VP:Gauge(Vacuum） Pa unit display AP:Absolute Pa unit display	Power Blank:Battery 3:External power (Analog output is available)	Installation P:Panel type S:Stand type

PG-200-

102

G P-

3 -

Series name

Rated pressure range

101:0~9.81 kPa

{0~0.1 kgf/cm2}

0~10 kPa

(Pa unit display）
102:0~98.1 kPa

{0~1 kgf/cm2}

0~100 kPa

(Pa unit display）
103:0~981 kPa

{0~10 kgf/cm2}

0~1 MPa

(Pa unit display）

Pressure reference

G:Gauge
VH:Gauge(Vacuum)
AH:Absolute
GP:Gauge
Pa unit display

GMP:Gauge(103 type only）
Pa unit display
VP:Gauge(Vacuum）
Pa unit display
AP:Absolute
Pa unit display

Power

Blank:Battery
3:External power
(Analog output is available)

Installation

P:Panel type
S:Stand type

LIST OF MODEL NUMBERS

●Pa version

Model number	Pressure reference	Rated pressure (Pa unit display)	Unit of display	Pressure medium	Installation	Power	CAD
PG-200-101GP-1P	Gauge	0~10	kPa	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-101GP-3-P	Gauge	0~10	kPa	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-101GP-S	Gauge	0~10	kPa	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-101GP-3-S	Gauge	0~10	kPa	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102GP-P	Gauge	0~100	kPa	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102GP-3-P	Gauge	0~100	kPa	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102GP-S	Gauge	0~100	kPa	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102GP-3-S	Gauge	0~100	kPa	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-103GP-P	Gauge	0~1000	kPa	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-103GP-3-P	Gauge	0~1000	kPa	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-103GP-S	Gauge	0~1000	kPa	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-103GP-3-S	Gauge	0~1000	kPa	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102VP-P	Gauge	0~− 100	kPa	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102VP-3-P	Gauge	0~− 100	kPa	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102VP-S	Gauge	0~− 100	kPa	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102VP-3-S	Gauge	0~− 100	kPa	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102AP-P	Absolute	0~100 kPa abs	kPa abs	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102AP-3-P	Absolute	0~100 kPa abs	kPa abs	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102AP-S	Absolute	0~100 kPa abs	kPa abs	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102AP-3-S	Absolute	0~100 kPa abs	kPa abs	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）

●Non SI unit version

Model number	Pressure reference	Rated pressure kPa {kgf/cm2}	Unit of display	Pressure medium	Installation	Power	CAD
PG-200-101G-P	Gauge	0~9.81{0~1000 mmH2O}	mmH2O	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-101G-3-P	Gauge	0~9.81{0~1000 mmH2O}	mmH2O	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-101G-S	Gauge	0~9.81{0~1000 mmH2O}	mmH2O	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-101G-3-S	Gauge	0~9.81{0~1000 mmH2O}	mmH2O	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102G-P	Gauge	0~98.1{0~1}	kgf/cm2	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102G-3-P	Gauge	0~98.1{0~1}	kgf/cm2	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102G-S	Gauge	0~98.1{0~1}	kgf/cm2	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102G-3-S	Gauge	0~98.1{0~1}	kgf/cm2	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-103G-P	Gauge	0~981{0~10}	kgf/cm2	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-103G-3-P	Gauge	0~981{0~10}	kgf/cm2	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-103G-S	Gauge	0~981{0~10}	kgf/cm2	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-103G-3-S	Gauge	0~981{0~10}	kgf/cm2	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102VH-P	Gauge	0~− 98.1 {0~- 735 mmHg}	mmHg	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102VH-3-P	Gauge	0~− 98.1 {0~- 735 mmHg}	mmHg	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102VH-S	Gauge	0~− 98.1 {0~- 735 mmHg}	mmHg	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102VH-3-S	Gauge	0~− 98.1 {0~- 735 mmHg}	mmHg	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）
PG-200-102AH-P	Absolute	0~98.1 kPa abs {0~735 mmHg abs}	mmHg	For non-corrosive gases	Panel type	Battery	3D CAD（Any Model）
PG-200-102AH-3-P	Absolute	0~98.1 kPa abs {0~735 mmHg abs}	mmHg	For non-corrosive gases	Panel type	External power	3D CAD（Any Model）
PG-200-102AH-S	Absolute	0~98.1 kPa abs {0~735 mmHg abs}	mmHg	For non-corrosive gases	Stand type	Battery	3D CAD（Any Model）
PG-200-102AH-3-S	Absolute	0~98.1 kPa abs {0~735 mmHg abs}	mmHg	For non-corrosive gases	Stand type	External power	3D CAD（Any Model）

〈Option〉---DC3.6 V lithium batteryーOrder item: Lithium battery
The battery is an expendable item.The first one is provided with the unit.

ENVIRONMENTAL CHARACTERISTICS

Test item	Test conditions	Permissible change
Vibration	Amplitude 1.5 mm P-P, 10 ~ 55 Hz, 3 directions for 2 hours each (packed)	Pressure indication, switch setting and analog output (zero and span) variation: ± 1 %F.S. maximum each. (Note: No analog output for the battery type.)
Shock	98.1 m/s2 , 3 directions for 3 times each (packed)
Moisture resistance	40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling	0 ~ Rated pressure, 106 cycles