Rotary coded switch SH-7000
-
SH-7000
-
SH-7000
- ●To buy this product, please go to the following Online Web stores.
Gray code output available, increased terminal layout variatio
FeaturesFeatures
- Center common terminal pins location
- High digit visibility
- Gray code output available
- Washable after soldering
- In this series, material data sheets ideal for REACH-SVHC
surveys etc. can be downloaded in chemSHERPA-AI format. - Download chemSHERPA-AI from the list of P/N below
Standard Specifications
| Circuit type | BCD(Real code, Complementary code, Gray code) BCH(Real code, Complementary code, Gray code) |
|---|---|
| Operating temperature range | − 40 ~ 85 °C,− 40 ~ 105 °C (Gray code) |
| Storage temperature range | − 40 ~ 85 °C,− 40 ~ 105 °C (Gray code) |
| Sealing | Washable by “O” ring |
| Net weight | Approx. 0.38 g |
Electrical Characteristics
| Contact rating | Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA |
|---|---|
| Contact resistance | 100 mΩ maximum |
| Insulation resistance | 1000 MΩ (DC100 V) minimum |
| Dielectric strength | AC250 V, 60 s |
Mechanical Characteristics
| No. of positions | 10, 16 |
|---|---|
| Adjustment torque | 3 ~ 20 mN·m { 3~ 204 gf·cm} maximum |
| Stepping angle | 36° (10 positions) |
| Solderability | 245 ± 3 °C, 2 ~ 3 s |
| Soldering heat | Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of ter minal to backside of board,5 ~ 6 s, two times maximum Reflow : Peak temperature 255 °C Manual soldering： 350 ± 10 °C, 3 ~ 4 s |
| Shear (adhesion) | 5 N {0.51 kgf} 10 s |
| Substrate bending | Width 90 mm, bend 3 mm, 5 s, 1 time |
| Pull-off strength | 5 N {0.51 kgf} 10s |
Environmental Characteristics
| Vibration | Amplitude 1.5 mm or Acceleration 98 m/s ,10-500-10 Hz, 3 directions for 2 h each |
|---|---|
| Shock | 490 m/s2, 11 ms 6 directions for 3 times each |
| Load life | 10000 steps minimum, DC5 V, 100 mA |
| Humidity | 40 °C, Relative humidity 90 ~ 95 %,240 h |
| High temperature exposure | 85 °C, 96 h |
| Low temperature exposure | − 40 °C, 96 h |
| Thermal shock | − 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles − 40 (0.5 h) ~ 105 °C ( 0.5 h ), 5 cycles (Gray code) |
Part Number Designation
| SH-7 | 0 | 1 | 0 | T | A |
|---|---|---|---|---|---|
|
Series name |
Shape of rotor 0:
Without knob
(Minus slot) |
Code format 1:
10 positions, Real code
3:
10 positions, Complementary code
4:
10 positions, Gray code
5:
16 positions, Real code
7:
16 positions, Complementary code
8:
16 positions, Gray code
|
Setting position 0:
Top
|
Packaging form T:
Taping (Reel)
M:
Magazine
|
Shape of terminals A:
J-hook
B:
Gull wing
C:
Through hole pins
|
List of Part Numbers
CAD and chemSHERPA-AI (a material data sheet ideal for REACH surveys, etc. / version: 2.09.00) can be downloaded from the popup for each P/N in the table below. *Need to log in to download.
| Part No. | Circuit (Code) | Setting position | Shape of rotor | Terminals | Packaging spec | Material data | CAD |
|---|---|---|---|---|---|---|---|
| SH-7010TA | 10 positions, Real |
Top | Without knob | J-hook | Taping, 500 pcs./reel |
||
| SH-7010MA | 10 positions, Real |
Top | Without knob | J-hook | Magazine, 50 pcs./stick |
||
| SH-7010TB | 10 positions, Real |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7010MB | 10 positions, Real |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
||
| SH-7010MC | 10 positions, Real |
Top | Without knob | Through hole |
Magazine, 50 pcs./stick |
||
| SH-7030TA | 10 positions, Complementary |
Top | Without knob | J-hook | Taping, 500 pcs./reel |
||
| SH-7030MA | 10 positions, Complementary |
Top | Without knob | J-hook | Magazine, 50 pcs./stick |
||
| SH-7030TB | 10 positions, Complementary |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7030MB | 10 positions, Complementary |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
||
| SH-7030MC | 10 positions, Complementary |
Top | Without knob | Through hole |
Magazine, 50 pcs./stick |
||
| SH-7040TB | 10 positions, Gray |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7040MB | 10 positions, Gray |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
||
| SH-7050TA | 16 positions, Real |
Top | Without knob | J-hook | Taping, 500 pcs./reel |
||
| SH-7050MA | 16 positions, Real |
Top | Without knob | J-hook | Magazine, 50 pcs./stick |
||
| SH-7050TB | 16 positions, Real |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7050MB | 16 positions, Real |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
||
| SH-7050MC | 16 positions, Real |
Top | Without knob | Through hole |
Magazine, 50 pcs./stick |
||
| SH-7070TA | 16 positions, Complementary |
Top | Without knob | J-hook | Taping, 500 pcs./reel |
||
| SH-7070MA | 16 positions, Complementary |
Top | Without knob | J-hook | Magazine, 50 pcs./stick |
||
| SH-7070TB | 16 positions, Complementary |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7070MB | 16 positions, Complementary |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
||
| SH-7070MC | 16 positions, Complementary |
Top | Without knob | Through hole |
Magazine, 50 pcs./stick |
||
| SH-7080TB | 16 positions, Gray |
Top | Without knob | Gull wing | Taping, 500 pcs./reel |
||
| SH-7080MB | 16 positions, Gray |
Top | Without knob | Gull wing | Magazine, 50 pcs./stick |
Outline dimensions
Recommended P.C.B. PAD Outline Dimensions
Terminal connection / P.C.B. through hole dimensions
(Unit:mm)
Packaging specifications
(Unit:mm)
〈Taping packaging specifications〉
● Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500, pcs., etc.
● Taping version is boxed with one reel (500 pcs.).
● Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the diagrams below:
-
●Embossed tape dimensions
-
●Reel dimensions
(Conforms to JIS C 0806-3,In accordance with EIAJ ET-7200A)
-
●SH-70□0TA
●SH-70□0TB
〈Magazine packaging specifications〉
● Please order the multiple numbers of the specific packing quantities.
Pieces in package : 50 pcs./stick (Magazine length：390 ± 3 mm long)
-
● Magazine dimensions
Environmental Data
- ●The above contents and descriptions are subject to change without notice.
