DIP-Schiebeschalter CYP｜NIDEC COMPONENTS EUROPE GmbH

DIP-Schiebeschalter CYP

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler unten.
Verkaufskanal Überprüfen Sie die Verteiler.: VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.

Thin piano switch

Low profile design of 5 mm
Excellent contact stability by twin gold-plated contact
Washable type available by seal tape
RoHS compliant
Fine click action

Standard Specifications

Operating temp. range	− 40 ~ 85 °C
Storage temp. range	− 40 ~ 85 °C
Sealing	Washable type available with seal tape
Net weight	Approx. 0.28 g (CYP-02) Approx. 0.50 g (CYP-04) Approx. 0.73 g (CYP-06) Approx. 0.97 g (CFP-08) Approx. 1.16 g (CFP-10)

Electrical Characteristics

接点定格	Non-switching DC50 V 100 mA Switching DC6 V, 100 mA DC24 V, Minimum 25 mA DC20 mV 1 μA
接触抵抗	100 mΩ maximum
絶縁抵抗	1000 MΩ (DC100 V) minimum
耐電圧	AC500 V, 60 s

Mechanical Characteristics

Operation force	0.3 ~ 5 N {0.03 ~ 0.51 kgf} maximum
Stop strength	8 N {0.82 kgf} 60 s
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Reflow：255 °C (Peak temperature) Flow：260 ± 3 °C, 5 ~ 6 s, two times maximum （Please refer to the profile below） Manual soldering：350 ± 10 °C, 3 ~ 4 s
Shear (Adhesion)	5 N {0.51 kgf} 10 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength	5 N {0.51 kgf} 10 s

Environmental Characteristics

Vibration	(Amplitude) 1.5 mm or (Acceleration) 98 m/s2 , 10-500 Hz, 3 directions for 10 cycles each
Shock	490 m/s , 11 ms, 6 directions for 3 times each
Load life	Continuous load 500 cycles, DC6 ± 0.5 V, 100 ± 10 mA
Humidity	−10 ~ 65 °C, Relative humidity 0 ~ 96 %,24 h for 10 cycles
High temp. exposure	85 °C, 96 h
Low temp. exposure	− 40 °C, 96 h
Thermal shock	− 40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles

Part number designation

CYP -	08	0	1	T	B
Series name	No. of bits 02: 2 bits 04: 4 bits 06: 6 bits 08: 8 bits 10:10 bits	ON direction 0：Upper 1：Lower	Structure 0：Flat lever (With seal tape) 1：Flat lever (Without seal tape) 2：Convex lever (Without seal tape)	Form of packaging T ：Taping (Reel) M：Magazine	Shape of terminal B：Gull wing C：Through hole pin

CYP -

Series name

No. of bits

02: 2 bits

04: 4 bits

06: 6 bits
08: 8 bits

10:10 bits

ON direction

0：Upper
1：Lower

Structure

0：Flat lever (With seal tape)

1：Flat lever (Without seal tape)

2：Convex lever (Without seal tape)

Form of packaging

T ：Taping (Reel)

M：Magazine

Shape of terminal

B：Gull wing

C：Through hole pin

List of part numbers

①Flat lever (Without seal tape)

Part number	No. of bits	ON direction	Shape of terminal	Form of packaging	CAD
CYP-0202MB	2	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0212TB	2	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0212MB	2	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0402TB	4	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0402MB	4	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0412TB	4	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0412MB	4	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0602TB	6	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0602MB	6	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0612TB	6	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0612MB	6	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0802TB	8	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0802MB	8	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0812TB	6	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0812MB	6	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-1002TB	10	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-1002MB	10	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-1002MB	10	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-1012MB	10	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0202MC	2	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-C0212M	2	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0402MC	4	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0412MC	4	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0602MC	6	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0612MC	6	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0802MC	8	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0812MC	8	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-1002MC	10	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-1012MC	10	Lower	Through hole pin	Magazine	3D CAD（Any Model）

②Convex lever (Without seal tape)

Part number	No. of bits	ON direction	Form of packaging	Shape of terminal	CAD
CYP-0200TB	nbsp;2	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0200MB	2	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0210TB	2	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0210MB	2	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0400TB	4	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0400MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0410TB	4	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0410MB	4	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0600TB	6	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0600MB	6	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0610TB	6	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0610MB	6	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0800TB	8	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0800MB	8	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0810TB	8	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0810MB	8	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-1000TB	10	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-1000MB	10	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-1010TB	10	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-1010MB	10	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0200MC	2	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0210MC	2	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0400MC	4	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0410MC	4	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0600MC	6	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0610MC	6	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0800MC	8	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0810MC	8	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-1000MC	10	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-1010MC	10	Lower	Magazine	Through hole pin	3D CAD（Any Model）

③Flat lever (With seal tape)

Part number	No. of bits	ON direction	Form of packaging	Shape of terminal	CAD
CYP-0201TB	nbsp;2	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0201MB	2	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0211TB	2	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0211MB	2	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0401TB	nbsp;4	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0401MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0411TB	4	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0411MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0601TB	nbsp;6	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0601MB	6	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0611TB	6	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0611MB	6	ower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0801TB	nbsp;8	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0801MB	8	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0811TB	8	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0811MB	8	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-1001TB	10	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-1001MB	10	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-1011TB	10	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-1011MB	10	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0201MC	2	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0211MC	2	Lower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0401MC	4	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0411MC	4	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0601MC	6	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0611MC	6	ower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0801MC	8	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0811MC	8	Lower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-1001MC	10	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-1011MC	10	Lower	Magazine	Through hole pins	3D CAD（Any Model）

Outline dimensions

(Unit:mm)

Recommended P.C.B. PAD Outline Dimensions

(Unit:mm)

Packaging specifications

(Unit:mm)

〈Taping packaging specifications〉

Taping version is packaged in 700 pcs. per reel. Orders will be accepted for units of 700 pcs., i.e., 700, 1400, 2100 pcs., etc.

Taping version is boxed with 1 reel.

Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the diagrams below:

(Unit:mm)

● Embossed tape dimensions
● Reel dimensions

No. of bits	A	W1	W2	N
2	φ 330 ± 2	25.4 ± 1	29.4 ± 1	φ 80 ± 1
4
6
8		33.4 ± 1	37.4 ± 1
10		45.4 ± 1	49.4 ± 1

● 2, 4, 6 bits
● 8, 10 bits

No. of bits	B	C	D
2	16	7.5 ± 0.1	―
4	24	11.5 ± 0.1
6	24	11.5 ± 0.1
8	32	14.2 ± 0.1	28.4 ± 0.1
10	42	20.2 ± 0.1	40.4 ± 0.1

〈Magazine packaging specifications〉

Packing quantities of magazines are different depending on the bit number of the switches.

Please order the multiple numbers of the specific packing quantities.
(e.g. 70 pcs., 140 pcs., 210 pcs., etc., in case of 2 bits version.)

【Pieces in package】
2 bits, 70 pcs. / stick
4 bits, 40 pcs. / stick
6 bits, 28 pcs. / stick
8 bits, 20 pcs. / stick
10 bits, 16 pcs. / stick

Unterlagen

Environmental Data

RoHS CoC

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Kontaktiere uns

Zur vorherigen Seite