DIP Slide Switch CYP｜NIDEC COMPONENTS CORPORATION

DIP Slide Switch CYP

●To buy this product, please go to the following Online Web stores.

Thin piano switch

FeaturesFeatures

Low profile design of 5 mm
Excellent contact stability by twin gold-plated contact
Washable type available by seal tape
RoHS compliant
Fine click action

Standard Specifications

Operating temp. range	− 40 ~ 85 °C
Storage temp. range	− 40 ~ 85 °C
Sealing	Washable type available with seal tape
Net weight	Approx. 0.28 g (CYP-02) Approx. 0.50 g (CYP-04) Approx. 0.73 g (CYP-06) Approx. 0.97 g (CFP-08) Approx. 1.16 g (CFP-10)

Electrical Characteristics

接点定格	Non-switching DC50 V 100 mA Switching DC6 V, 100 mA DC24 V, Minimum 25 mA DC20 mV 1 μA
接触抵抗	100 mΩ maximum
絶縁抵抗	1000 MΩ (DC100 V) minimum
耐電圧	AC500 V, 60 s

Mechanical Characteristics

Operation force	0.3 ~ 5 N {0.03 ~ 0.51 kgf} maximum
Stop strength	8 N {0.82 kgf} 60 s
Solderability	245 ± 3 °C, 2 ~ 3 s
Soldering heat	Reflow：255 °C (Peak temperature) Flow：260 ± 3 °C, 5 ~ 6 s, two times maximum （Please refer to the profile below） Manual soldering：350 ± 10 °C, 3 ~ 4 s
Shear (Adhesion)	5 N {0.51 kgf} 10 s
Substrate bending	Width 90 mm, bend 3 mm, 5 s, 1 time
Pull-off strength	5 N {0.51 kgf} 10 s

Environmental Characteristics

Vibration	(Amplitude) 1.5 mm or (Acceleration) 98 m/s2 , 10-500 Hz, 3 directions for 10 cycles each
Shock	490 m/s , 11 ms, 6 directions for 3 times each
Load life	Continuous load 500 cycles, DC6 ± 0.5 V, 100 ± 10 mA
Humidity	−10 ~ 65 °C, Relative humidity 0 ~ 96 %,24 h for 10 cycles
High temp. exposure	85 °C, 96 h
Low temp. exposure	− 40 °C, 96 h
Thermal shock	− 40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles

Part number designation

CYP -	08	0	1	T	B
Series name	No. of bits 02: 2 bits 04: 4 bits 06: 6 bits 08: 8 bits 10:10 bits	ON direction 0：Upper 1：Lower	Structure 0：Flat lever (With seal tape) 1：Flat lever (Without seal tape) 2：Convex lever (Without seal tape)	Form of packaging T ：Taping (Reel) M：Magazine	Shape of terminal B：Gull wing C：Through hole pin

CYP -

Series name

No. of bits

02: 2 bits

04: 4 bits

06: 6 bits
08: 8 bits

10:10 bits

ON direction

0：Upper
1：Lower

Structure

0：Flat lever (With seal tape)

1：Flat lever (Without seal tape)

2：Convex lever (Without seal tape)

Form of packaging

T ：Taping (Reel)

M：Magazine

Shape of terminal

B：Gull wing

C：Through hole pin

List of part numbers

①Flat lever (Without seal tape)

Part number	No. of bits	ON direction	Shape of terminal	Form of packaging	CAD
CYP-0202MB	2	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0212TB	2	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0212MB	2	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0402TB	4	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0402MB	4	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0412TB	4	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0412MB	4	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0602TB	6	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0602MB	6	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0612TB	6	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0612MB	6	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0802TB	8	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-0802MB	8	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-0812TB	6	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-0812MB	6	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-1002TB	10	Upper	Gull wing	Taping	3D CAD（Any Model）
CYP-1002MB	10	Upper	Gull wing	Magazine	3D CAD（Any Model）
CYP-1002MB	10	Lower	Gull wing	Taping	3D CAD（Any Model）
CYP-1012MB	10	Lower	Gull wing	Magazine	3D CAD（Any Model）
CYP-0202MC	2	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-C0212M	2	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0402MC	4	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0412MC	4	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0602MC	6	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0612MC	6	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0802MC	8	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-0812MC	8	Lower	Through hole pin	Magazine	3D CAD（Any Model）
CYP-1002MC	10	Upper	Through hole pin	Magazine	3D CAD（Any Model）
CYP-1012MC	10	Lower	Through hole pin	Magazine	3D CAD（Any Model）

②Convex lever (Without seal tape)

Part number	No. of bits	ON direction	Form of packaging	Shape of terminal	CAD
CYP-0200TB	nbsp;2	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0200MB	2	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0210TB	2	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0210MB	2	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0400TB	4	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0400MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0410TB	4	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0410MB	4	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0600TB	6	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0600MB	6	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0610TB	6	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0610MB	6	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0800TB	8	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0800MB	8	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0810TB	8	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0810MB	8	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-1000TB	10	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-1000MB	10	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-1010TB	10	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-1010MB	10	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0200MC	2	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0210MC	2	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0400MC	4	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0410MC	4	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0600MC	6	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0610MC	6	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0800MC	8	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-0810MC	8	Lower	Magazine	Through hole pin	3D CAD（Any Model）
CYP-1000MC	10	Upper	Magazine	Through hole pin	3D CAD（Any Model）
CYP-1010MC	10	Lower	Magazine	Through hole pin	3D CAD（Any Model）

③Flat lever (With seal tape)

Part number	No. of bits	ON direction	Form of packaging	Shape of terminal	CAD
CYP-0201TB	nbsp;2	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0201MB	2	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0211TB	2	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0211MB	2	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0401TB	nbsp;4	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0401MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0411TB	4	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0411MB	4	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0601TB	nbsp;6	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0601MB	6	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0611TB	6	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0611MB	6	ower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0801TB	nbsp;8	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-0801MB	8	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-0811TB	8	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-0811MB	8	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-1001TB	10	Upper	Taping	Gull wing	3D CAD（Any Model）
CYP-1001MB	10	Upper	Magazine	Gull wing	3D CAD（Any Model）
CYP-1011TB	10	Lower	Taping	Gull wing	3D CAD（Any Model）
CYP-1011MB	10	Lower	Magazine	Gull wing	3D CAD（Any Model）
CYP-0201MC	2	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0211MC	2	Lower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0401MC	4	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0411MC	4	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0601MC	6	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0611MC	6	ower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0801MC	8	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-0811MC	8	Lower	Magazine	Through hole pins	3D CAD（Any Model）
CYP-1001MC	10	Upper	Magazine	Through hole pins	3D CAD（Any Model）
CYP-1011MC	10	Lower	Magazine	Through hole pins	3D CAD（Any Model）